cant connect to network

[n00b]

hi
i finally got my driver working with ndiswrapper. and i did all my setup with iwconfig ( the network name, managed mode, wep key) but still im not getting a connection, when i do iwlist scan, my network is visible.
is there something im missing here
here is a ss
http://www.imagehosting.us/imagehosting/showimg.png/?id=269646[/img]

[LinuxFreak]

Dear n00b,
Hello,

Try to check your route and also try to ping www.yahoo.com and show what you got ?

# ping www.yahoo.com
# route -n

Best Regards.

[n00b]

i did no ping reply. The cards LED is lit up, and when i do that scan command i do see the network

[LinuxFreak]

Dear n00b,
Hello,

i did no ping reply. The cards LED is lit up, and when i do that scan command i do see the network

Can you tell me which provider you are using ?

are you getting Static/Dynamic IP Address ?

# iwconfig wlan0 ap 00:0D:3A:24:C2D

Best Regards.

[n00b]

i have cable internet
usual setup
wall -> modem --> router -->computer & wireless
ip address is dynamic, using DHCP


EDIT:: going to go try dhcpcleint wlan0 command
( i did it before but gave me errors or something brb with ss )

[n00b]

alright here it is
http://www.imagehosting.us/imagehost...png/?id=277744

[starfish]

What does your /etc/sysconfig/network-scripts/ifcfg-wlan0 file look like?

It appears that you have none based on the error messages. It should look like this:

DEVICE=wlan0
BOOTPROTO=dhcp
ONBOOT=yes

Hope this helps.

[n00b]

IT WORKED
tahnk you starfish
jus tiny problem
NOW, when i boot up the intialization for wlan0 does come up but it fails (threw ndiswrapper) and then when i go back to terminal and do modprobe ndiswrapper it doesnt work
i had to remove it from the modprobe conf and then when it boots up it diesnt try t load it and i have to do it manually
and suggestions on how to automatically get it working
thanks a lot once again, finally dnt have to switch back and forth to go on the net