following are my Linux router information
eth1= WAN IP= 22.214.171.124/32
eth0= LAN IP= 192.168.1.1/24
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0
routing table is
126.96.36.199 0.0.0.0 255.255.255.252
192.168.1.0 0.0.0.0 255.255.255.0
0.0.0.0 188.8.131.52 0.0.0.0
My ISP gave me IP Pool 184.108.40.206/29 to use this on my LAN.
my question is how can I use this IP pool on LAN side interface.
i think now its simple.
192.168.1.0 /24 is my LAN network and I can not change this, because i have near 180 PCs on my LAN.