Results 1 to 7 of 7

Thread: Problems with configuring squid in SLED10

Hybrid View

  1. #1

    Problems with configuring squid in SLED10

    Hi,
    Im definitely NOT a network manager, but sometimes I have to....

    I sit on a SuSE Enterprise Desktop 10.
    Problem:
    I am in a LAN: 10.x.y.z/255.255.255.0
    I have to go through the proxy: 64.a.b.c/255.255.255.224 which is in the next town to reach the internet.

    In the squid.conf file, I read:
    -----the line "acl allowed_hosts src 192.168.10.0/255.255.255.0 should be replaced with your own".

    Can anyone tell me where I can find these parameters??
    Thank you in advance...

    Firak

  2. #2
    the line you posted, "acl allowed_hosts src 192.168.10.0/255.255.255.0 should be replaced with your own", mean replace the 192.168.10.0 with your network. From your posting, it will be 10.x.y.0

    acl allowed_hosts src 10.x.y.0/255.255.255.0

    Of course you want to fully put your network, not the x.y. but the actual numbers.

    If after changing that line in the squid config file, if you still aren't able to browse the web using the proxy, look at the logs to determine if your 'network' is being changed by another router somewhere between you and the proxy.

    Let us know how this works out for you.

    -S9-

  3. #3

    Still problems with configuring squid in SLED10

    Hi S9,
    thank you for your answer.

    I used the values 10.x.y.0/255.255.255.0 earlier today.
    The log rcsquid reads: "FATAL: Bungled squid.conf line 1830: acl allowed_host scr 10.x.y.0/255.255.255.0

    I ca also not ping -c3 64.a.b.c
    The ping stops at 10.x.y.1

    Can you please guide me further

    Firak

  4. #4
    ok, a little more info will be needed. You mention 10.x.y.z as your network, 10.x.y.1 is of course your default gateway. You also mentioned 64.a.b.c as a proxy. Where is the squid proxy you are trying to config in relation to these different networks, in the 10 network or the 64 network or inbetween on a completely different network?

    -S9-

  5. #5
    Some info on 10.x.y.1 might be helpful too. Is it a firewall, a simple router, a proxy/router, what?

  6. #6

    Some more info

    Hi -S9-, thank you for your answer.
    May be this can give a better picture of my networkproblem:
    I have a filserver on 10.x.y.42/255.255.255.0 with LDAP Authentication and NFS file system. The fileserver have one networkcard.
    Connected to this server, via two simple switches, are 2 clients (30 more to come) configured with DHCP.

    I have started the squid service on the filserver and on two clients to access internett directly on 64.a.b.214/255.255.255.224.
    On all boxes Firefox is configured with proxyvalues 64.a.b.214 at port 8080 (- or 80).
    I do not know wether there is anything between my LAN and the proxy at 64.a.b.214/255.255.255.224.

    I have the understanding that it is possible for the clients to access the internett through the proxy (in the next town) 64.a.b.214/255.255.255.224,
    without going via the fileserver.

    From the client Linuxbox I can not ping 64.a.b.214 "Network unreachable".
    When I connect a Mac to the net, instead of a client, the ping is OK.

    Firak

Similar Threads

  1. Replies: 1
    Last Post: 06-27-2013, 11:57 PM
  2. Squid memory leak problems
    By comet in forum Linux - Hardware, Networking & Security
    Replies: 0
    Last Post: 01-20-2012, 04:26 PM
  3. Configuring Gnome in RH 8.0
    By Pleiades in forum Linux - Software, Applications & Programming
    Replies: 17
    Last Post: 02-10-2003, 09:53 PM
  4. Configuring Sound
    By binoyed in forum Redhat / Fedora
    Replies: 0
    Last Post: 01-09-2003, 04:31 PM
  5. Problems configuring Security Levels in RH 8...
    By mOdEtWo in forum Redhat / Fedora
    Replies: 2
    Last Post: 10-20-2002, 08:04 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •