I understand computers, and some Win networking. Am trying to learn linux to help a buddy. He has a small home office that is fed by DSL.
He is trying to add a wireless access point, but not having much luck.
His system is configured:
-------------linux server one
DSL-----wired router -------------linux server two
before we can add a wap, he says there is a problem:
"I understand most of what you are researching but the problem is circular.
Base router runs an AP of 188.8.131.52
Linux is set for 184.108.40.206
Linksys wireless set at 220.127.116.11
DHCP conflict between routers. Even when I turn off DHCP, the routers conflict and linux attempts to pickup DHCP responsibility. It is time out related. In other words, if the router does not assign an IP to a machine within X minutes, the Linux box tries to do it and blocks all other access.
We can’t get into the linux boxes to shut off the time delay DHCP.
The DSL router has to be the DHCP server and has to be turned on first, next the linux box 1 then 2, then the two print servers which have manually assigned IP’s. next the rest of the network catches up.
Then comes the never ending loop of linking 192.168.0 to 192.168.1 and with no active bridge, only some of the machines are seen on the DHCP that wins the speed battle. Netgear, linux or linksys."
Thanks in advance,