argg Xine and MPlayer are no longer working proporly now all I can do is watch 2 streaming videos and I can;t watch any video that on CD or on my HDD>. MPlayer/Xine both just close. all I did was update them though APT.

MPlayer error

Code:
MPlayer 1.0pre3-3.3.2 (C) 2000-2003 MPlayer Team
 
CPU: Advanced Micro Devices Athlon 4 /Athlon MP/XP Palomino 1541 MHz (Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Reading config file /etc/mplayer/mplayer.conf: No such file or directory
Reading config file /home/xquizit/.mplayer/config
Reading /home/xquizit/.mplayer/codecs.conf: Can't open '/home/xquizit/.mplayer/codecs.conf': No such file or directory
Reading /etc/mplayer/codecs.conf: Can't open '/etc/mplayer/codecs.conf': No such file or directory
Using built-in default codecs.conf.
font: can't open file: /home/xquizit/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup scripts.
Using usleep() timing
Can't open input config file /home/xquizit/.mplayer/input.conf: No such file or directory
Can't open input config file /etc/mplayer/input.conf: No such file or directory
Falling back on default (hardcoded) input config
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : No such device
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.
 
Playing driftworks3.wmv.
ASF file format detected.
============ ASF Stream group == START ===
 object size = 38
 stream count=[0x2][2]
   stream id=[0x1][1]
   max bitrate=[0x100c5][65733]
   stream id=[0x2][2]
   max bitrate=[0x76a66][485990]
============ ASF Stream group == END ===
VIDEO:  [WMV3]  640x480  24bpp
Clip info:
 name: Drift Works 3
 author:
 copyright:
 comments:
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 8005->176400 (64.0 kbit)
Selected audio codec: [ffwmav2] afm:ffmpeg (DivX audio v2 (ffmpeg))
==========================================================================
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
==========================================================================
Opening video decoder: [dmo] DMO video codecs
 
 
MPlayer interrupted by signal 11 in module: init_video_codec
- MPlayer crashed by bad usage of CPU/FPU/RAM.
  Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and
  disassembly. Details in DOCS/HTML/en/bugreports_what.html#bugreports_crash.
- MPlayer crashed. This shouldn't happen.
  It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
  gcc version. If you think it's MPlayer's fault, please read
  DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
  won't help unless you provide this information when reporting a possible bug.
Segmentation fault
the files it can't find are there

xine


Code:
This is xine (X11 gui) - a free video player v0.9.22.
(c) 2000-2003 The xine Team.
Built with xine library 1.0.0 (1-rc2)
Found xine library version: 1.0.0 (1-rc2).
XServer Vendor: The XFree86 Project, Inc. Release: 40300000,
        Protocol Version: 11, Revision: 0,
        Available Screen(s): 1, using 0
        Depth: 24.
        XShmQueryVersion: 1.1.
-[ xiTK version 0.10.5 [XMB]]-
-[ xiTK will use XShm ]-
-[ WM type: (EWMH) Metacity {Metacity} ]-
Display is not using Xinerama.
main: probing <aadxr3> video output plugin
main: probing <dxr3> video output plugin
dxr3_scr: Failed to open control device /dev/em8300-0 (No such file or directory)
main: probing <xv> video output plugin
main: probing <alsa> audio output plugin
load_plugins: failed to load audio output plugin <alsa>
main: probing <oss> audio output plugin
xine_interface: unknown param 10
xine_interface: unknown param 10
xine_interface: unknown param 10
xine_interface: unknown param 10
w32codec: init DirectShow/DMO video codec...
xiTK received SIGSEGV signal, RIP.
Aborted
I also get the same errors when using a compiled version >

TIA
Michael