Cisco and Post Codes

[10Dedfish]

Does anyone know here I can find a copy of the power on self test codes that cisco uses for it routers? So far the general answer has been to call cisco if your router has broken, but that is hard if you are underwater. So, If someone has any clue pls let me know.

10ded

http://www.cisco.com/pcgi-bin/Suppor...roubleshooting This isnt post codes but it is some generally helpful info.

[Kernel_Killer]

If you still want to, you can still use my Cisco, and I can show you a real self test.

[Kernel_Killer]

Here's one:

System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
2500 processor with 16384 Kbytes of main memory

F3: 8899948+492908+749956 at 0x3000060

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco Internetwork Operating System Software 
IOS (tm) 2500 Software (C2500-I-L), Version 12.2(13), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 19-Nov-02 23:36 by pwade
Image text-base: 0x0304BB4C, data-base: 0x00001000

cisco 2500 (68030) processor (revision F) with 16384K/2048K bytes of memory.
Processor board ID 04856357, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)



Press RETURN to get started!


agent on host NS2501 is undergoing a cold start