how to configure / install redhat 8.0 to my PC
my pc running with windows OS
First thing is does your hard drive have a partition already on it other than the windows.
If the answer is yes or you have a second drive then put in the disk 1 of 3 installation.
Go through the steps till you get to the bootloader. Select Grub as your bootloader and let it write it to the mbr. Next when you get to the partition screen and make sure you use the following
If the disk is partitioned
If you have a second drive
Let it autopartition. And you should next be getting to the packages, select the packages you want or let it do it itself.
Hope this helps and welcome to Linux