Results 1 to 8 of 8

Thread: cdrecord woes

  1. #1

    cdrecord woes

    Here's the error message I get when I go to burn an iso (did in "dummy" mode as to avoid making more "coasters" than I already have-->

    Waiting for reader process to fill input buffer ... input buffer ready.
    Starting new track at sector: 0
    Track 01: 92 of 657 MB written (fifo 100%) 2.0x.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
    CDB: 2A 00 00 00 B8 AB 00 00 1F 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: F1 00 03 00 00 B0 C6 12 00 00 00 00 0C 08 00 00
    Sense Key: 0x3 Medium Error, deferred error, Segment 0
    Sense Code: 0x0C Qual 0x08 (write error - recovery failed) Fru 0x0
    Sense flags: Blk 45254 (valid)
    cmd finished after 0.165s timeout 40s

    write track data: error after 96819200 bytes
    Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
    Writing time: 309.530s
    Fixating...
    WARNING: Some drives don't like fixation in dummy mode.
    Fixating time: 0.010s
    cdrecord: fifo had 1589 puts and 1526 gets.
    cdrecord: fifo was 0 times empty and 1472 times full, min fill was 92%.
    -----
    I'm using brand new disks...74min, cd-r 700MB and 74min 650MB cdr-w
    What's up with this?

  2. #2

    Re:cdrecord woes

    Try running the drive at a slower speed.

    If this doesn't help, try posting some more info e.g. the brand of the drive and your kernel version.

  3. #3

    Re:cdrecord woes

    [quote author=quandary link=board=1;threadid=6434;start=0#60654 date=1046031141]
    Try running the drive at a slower speed.

    If this doesn't help, try posting some more info e.g. the brand of the drive and your kernel version.
    [/quote]

    I tried the lower speed, got the same error.

    I'm using Slack 8.1, kernel 2.4.18.

    The cd writer is a Sony 16x, rev 1.0e--brand new...just installed Friday night.

  4. #4

    Re:cdrecord woes

    hello,
    what command options are you using to burn this?
    e.g. cdrecord -dev 0,1,0 speed=4 discname.iso.

  5. #5

    Re:cdrecord woes

    [quote author=pbharris link=board=1;threadid=6434;start=0#60660 date=1046035563]
    hello,
    what command options are you using to burn this?
    e.g. cdrecord -dev 0,1,0 speed=4 discname.iso.

    [/quote]

    I used the one you mentioned (with speeds 1-4 as my cdrw disks are only good at those speeds--and with a cd-r I used 1-16 for speed)--same errors.

    I also tried to write in gtoaster (1.0Beta6) and xcdroast (.0.98alpha10)...again, same errors, trying different speeds.

    /var/log/messages shows nothing about this either. ???

    Seems to record audio OK, but I only tried once. CDRW blanks ok, so I haven't a clue as to what's up.

    Thanks for any help.

  6. #6

    Re:cdrecord woes

    hello,
    google implies this may be due to an size of the iso issue, have you tried passing in the size of the CD to be burnt?

  7. #7

    Re:cdrecord woes

    You also might consider increasing the fifo size e.g.

    cdrecord -dummy fs=16M dev=0,1,0 speed=4 discname.iso

  8. #8

    Re:cdrecord woes

    I just tested in my RH distro. Couldn't burn a cd, but had no audio problems.

    Think you guys are right..it's something to do with the iso/size of file.

Similar Threads

  1. CD drive detection with cdrecord or cdrdao
    By sirbone72 in forum Linux - General Topics
    Replies: 5
    Last Post: 11-25-2004, 09:17 AM
  2. Yehaaa ... my first successful cdrecord at linux
    By Black666 in forum Linux - General Topics
    Replies: 9
    Last Post: 05-29-2002, 03:54 PM
  3. Praise to cdrecord
    By in forum Linux - Software, Applications & Programming
    Replies: 5
    Last Post: 05-12-2002, 02:08 PM
  4. cdrecord question
    By Digital_Froggy in forum Linux - General Topics
    Replies: 8
    Last Post: 01-06-2002, 05:39 PM
  5. cdrecord??
    By boblucci in forum Linux - Software, Applications & Programming
    Replies: 3
    Last Post: 12-29-2001, 09:58 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •