Results 1 to 3 of 3

Thread: I think I need to know how to IPmasq

  1. #1

    I think I need to know how to IPmasq

    I have a Sharp Zaurus connected through USB ethernet to a Mandrake box, which is in turn connected to a router, which is connected to the internet. I want the Zaurus to see the router, but I'm not sure how to do that. Here is the ouput from ifconfig:

    eth0
    Link encap:Ethernet HWaddr 00:03:6D:1D5:B2
    inet addr:192.168.0.36 Bcast:192.168.0.255 Mask:255.255.255.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:243746 errors:0 dropped:0 overruns:0 frame:0
    TX packets:141134 errors:0 dropped:0 overruns:0 carrier:0
    collisions:133 txqueuelen:100
    RX bytes:353449758 (337.0 Mb) TX bytes:9982538 (9.5 Mb)
    Interrupt:11 Base address:0xdc00

    usb0
    Link encap:Ethernet HWaddr 40:00:00:00:FF:05
    inet addr:192.168.129.200 Bcast:192.168.129.255 Mask:255.255.255.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:100
    RX bytes:0 (0.0 b) TX bytes:260 (260.0 b)

    The IP address of the Zaurus is 192.168.129.201. From the Zaurus I can ping 192.168.129.200, but I can't ping 192.168.0.36.

    The IP to the router is 192.168.0.1, can anyone help me out with this?

    Thank you.

  2. #2

    Re:I think I need to know how to IPmasq

    Well with it setup like that you will never see the internet, you are on totally different subnets....

    Why cant you put the Zaurus on the same subnet as the router and computer? IE. Router, 192.168.0.1 Drake box 192.168.0.2 Zaurus 192.168.0.3 ?

    Or am I just totally off because of the USB ethenet adapter? Hmm, I might be totally off since it appears that the USB adapter just gave itself that other IP.... Can you change the USB0 IP to 192.168.0.xx ? If so then maybe it will work, but if not, you will have to set up the mandrake box to forward the 192.168.129.200 addresses to the 192.168.0.1 which will be a pain Im sure.....

  3. #3

    Re:I think I need to know how to IPmasq

    I tried to set it up like that but had problems. I was able to ping the Mandrake box, 192.168.0.36, but still could not ping the router, 192.168.0.1. I also could no longer get Qtopia to connect to the Zaurus. I looked through the Qtopia files but I did not see 192.168.129.201 hard coded into anything, so I don't know what was wrong.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •