Results 1 to 5 of 5

Thread: UPS

  1. #1
    mugs
    Guest

    UPS

    I have a Belkin USB UPS which does work in Linux, but I am looking for anytype of software that may allow me to configure it some. Does anyone know of anything? Thanks

  2. #2
    Spot
    Guest

    Re:UPS

    There are several Belkin USB devices with USB support under linux, according to http://www.linux-usb.org/devices.html. You'll need at least a 2.4.10 kernel, from the looks of it.
    You didn't mention a model number so you'll have to search through the list yourself.

    you might take a look at these for reference as well:
    http://groups.google.com/groups?hl=e...269D%40att.net

    http://groups.google.com/groups?hl=e...rldnet.att.net

    http://groups.google.com/groups?as_q...n&num=30&hl=en

  3. #3
    mugs
    Guest

    Re:UPS

    Spot, I looked at those links and someone suggested downloading the Belkin Serial UPS software. So, I did and I installed it to the USB port (dont know if I did the correct one) When it tried to run it, it said it couldnt communicate with the UPS. So, I figured I would try again and try a different port. Well, it wont let me since it says the UPSD Daemon is runnning. How do I stop it from running. It wont let me install again or unistall. Thanks.

  4. #4
    mugs
    Guest

    Re:UPS

    Oh, also, how do I find which usbport the UPS is on?

  5. #5
    mugs
    Guest

    Re:UPS

    Me again. I figured out how to uninstall the software (but not stop the process)...So, how do I find which port it is on, or can I somehow map it to a com port? I went into Yast2 and it shows the UPS, but doesnt give info on which port....

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •