Hello all, I am new here and need your help.
This is mi issue... I try to create a Linux BOX Swith that support VLANs with one VLan client mobil. To do it I modified the dhcpd.conf to delivery differents nets in 3 eths, for example: 192.168.1.0 with 3 subnets, one in eth0. Also with other net range 192.168.2.0 in eth1, and 192.168.3.0 in eth2, I did put some clientes fixed by MAC, by example 192.168.1.5 with 00-08-XXXX and It works fine in the 1st nic, and the DHCP works.
Then I able eth1:1 with the second range of the first (192.168.1.64) here and eth2:1 with the 3th range here (192.168.1.128) here.
Then when I try to delivery one segment od IPs outside VLAN mobil, those disable the eth1 or eth2, I suppose because the delivery no understand what IP gave to the client.
Showing the message: Interface eth1 matches multiple shared networks
I try to simulate the CISCO Works system for VLAN mobile clients.
Please I need ideas and help.