Hello all,

I just tried tutorials using ethtool and mii-tool under Simple Network Troubleshooting Chapter. However, I got this error messages:

[root@tomahawk g00rkha]# mii-tool eth0
SI0CGMIIPHY on 'eth0' failed: Operation not supported

And when I tried the other one, which is ethtool, I got this:

[root@tomahawk g00rkha]# ethtool eth0
Settings for eth0:
No data available

[root@tomahawk g00rkha]# dmesg | more
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:02.0
PCI: Sharing IRQ 11 with 00:06.0
PCI: Sharing IRQ 11 with 01:00.0
PCI: Found IRQ 11 for device 00:02.1
Yenta IRQ list 06b8, PCI irq11
Socket status: 30000006
Yenta IRQ list 06b8, PCI irq11
Socket status: 30000010
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
cs: memory probe 0x60000000-0x60ffffff: clean.
xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh)
divert: allocating divert_blk for eth0
eth0: Xircom: port 0x300, irq 3, hwaddr 00:10:A4:E7:7E:40
eth0: MII link partner: 45e1
eth0: MII selected
eth0: media 100BaseT, silicon revision 4

Something wrong with the drivers or need to patch. Thanks for your answers, really appreciate.

Rgds,
Nick