I'm having trouble to configure these two. Let me know if there are any online resources, though I've tried.

Huawei S2700-26TP-SI-AC is a 26 port switch.
I'd like make port 2 for trunking of vlan 2 and 5.
Here vlan 2 will have port 3, 4 and
vlan 5 will have port 5, 6, 7, 8.

I've added two vlan at eth1 of my linux box using following commands:
vconfig add eth1 2
vconfig add eth1 5

eth1.2 Link encap:Ethernet HWaddr 00:E0:4C:56:29:9D
inet addr:10.0.0.33 Bcast:10.0.0.63 Mask:255.255.255.224

eth1.5 Link encap:Ethernet HWaddr 00:E0:4C:56:29:9D
inet addr:10.0.0.129 Bcast:10.0.0.159 Mask:255.255.255.224

Now, from a host 10.0.0.35/27 connected to cisco2950 port 3, I can ping 10.0.0.34 but cannot reach 10.0.0.33 and

From linuxbox 10.0.0.33/27 I can't ping 10.0.0.34 or 10.0.0.35.
Interesting things is that I can see the packets trying from 10.0.0.35 using
tcpdump -i eth1


Little help will be highly appreciated.