Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19
Squid/Networking
Results 1 to 2 of 2

Thread: Squid/Networking

  1. #1
    Newbie
    Join Date
    Dec 2011
    Location
    England
    Posts
    1

    Squid/Networking

    Hi to all

    This is my first post please forgive if I have put it in the wrong place...

    OK here we go...

    I am having proplems connecting clients to the internet... who must go via the proxy!

    I have a project which is rather large, but I will go stright in and tell you my set up

    I have a server running Ubuntu on this server I have installed squid

    The server has 2 network cards eth0, which is connected to the internet
    and eth1 which is connected to my LAN

    connection to the internet is estabilshed and working no problem

    I have set the LAN IP address as 192.168.0.3
    the WAN is set to <staticIP> address

    the LAN connects to a router
    The Router IP address is 192.168.0.2

    The router is set to dish out IP addresses from 192.168.0.12 to 192.168.0.253

    My routing table is set with the following script

    <>
    #!/bin/sh
    # squid server IP

    SQUID_SERVER="192.168.0.3"

    # Interface connected to Internet
    INTERNET="eth0"

    # Interface connected to LAN
    LAN_IN="eth1"

    # Squid port
    SQUID_PORT="3128"

    # DO NOT MODIFY BELOW
    # Clean old firewall
    iptables -F
    iptables -X
    iptables -t nat -F
    iptables -t nat -X
    iptables -t mangle -F
    iptables -t mangle -X

    # Load IPTABLES modules for NAT and IP conntrack support
    modprobe ip_conntrack
    modprobe ip_conntrack_ftp
    # For win xp ftp client
    #modprobe ip_nat_ftp
    echo 1 > /proc/sys/net/ipv4/ip_forward

    # Setting default filter policy
    iptables -P INPUT DROP
    iptables -P OUTPUT ACCEPT

    # Unlimited access to loop back
    iptables -A INPUT -i lo -j ACCEPT
    iptables -A OUTPUT -o lo -j ACCEPT

    # Allow UDP, DNS and Passive FTP
    iptables -A INPUT -i $INTERNET -m state --state ESTABLISHED,RELATED -j
    ACCEPT

    # set this system as a router for Rest of LAN
    iptables --table nat --append POSTROUTING --out-interface $INTERNET -j
    MASQUERADE
    iptables --append FORWARD --in-interface $LAN_IN -j ACCEPT

    # unlimited access to LAN
    iptables -A INPUT -i $LAN_IN -j ACCEPT
    iptables -A OUTPUT -o $LAN_IN -j ACCEPT

    # DNAT port 80 request comming from LAN systems to squid 3128
    ($SQUID_PORT) aka transparent proxy
    iptables -t nat -A PREROUTING -i $LAN_IN -p tcp --dport 80 -j DNAT --to
    $SQUID_SERVER:$SQUID_PORT

    # if it is same system
    iptables -t nat -A PREROUTING -i $INTERNET -p tcp --dport 80 -j
    REDIRECT
    --to-port $SQUID_PORT

    # DROP everything and Log it
    iptables -A INPUT -j LOG
    iptables -A INPUT -j DROP

    <>

    Im not 100% sure if this script is correct but i have it on good authority that it is...
    However I am open to suggestions

    my squid.conf
    <>
    http_port 192.168.0.3:3128

    visible_hostname SomeDomaine
    mail_from squid@anemail.com
    client_netmask 255.255.255.255
    snmp_incoming_address 0.0.0.0
    snmp_outgoing_address 255.255.255.255
    udp_incoming_address 0.0.0.0
    udp_outgoing_address 255.255.255.255
    icp_port 3130 proxy-only
    cache_replacement_policy lru
    memory_replacement_policy lru
    cache_dir ufs /var/spool/squid 100 16 256
    hierarchy_stoplist cgi-bin ?
    access_log /var/log/squid/access.log squid
    cache_log /var/log/squid/cache.log
    cache_store_log /var/log/squid/store.log
    pid_filename /var/run/squid.pid
    hosts_file /etc/hosts
    icon_directory /usr/share/squid/icons
    error_directory /usr/share/squid/errors/en
    diskd_program /usr/lib/squid/diskd-daemon
    unlinkd_program /usr/lib/squid/unlinkd
    debug_options ALL,1
    ftp_user Squid@
    uri_whitespace strip
    cache_effective_user squid
    cache_effective_group squid
    cache_mgr root
    mail_program mail
    umask 027
    announce_host tracker.ircache.net
    as_whois_server whois.ra.net
    wccp_address 0.0.0.0
    wccp2_address 0.0.0.0
    wccp_router 0.0.0.0
    store_dir_select_algorithm least-load
    coredump_dir /var/spool/squid
    icp_query_timeout 0
    maximum_icp_query_timeout 2000
    mcast_icp_query_timeout 2000
    dead_peer_timeout 10 seconds
    forward_timeout 4 minutes
    connect_timeout 1 minutes
    peer_connect_timeout 30 seconds
    read_timeout 15 minutes
    request_timeout 5 minutes
    persistent_request_timeout 1 minutes
    pconn_timeout 120 seconds
    ident_timeout 10 seconds
    dns_timeout 2 minutes
    dns_retransmit_interval 5 seconds
    snmp_port 0
    cache_mem 8 MB
    cache_swap_low 90
    cache_swap_high 95
    maximum_object_size 4096 KB
    minimum_object_size 0 KB
    maximum_object_size_in_memory 8 KB
    ipcache_size 1024
    ipcache_low 90
    ipcache_high 95
    fqdncache_size 1024
    ftp_list_width 32
    memory_pools_limit 5 MB
    request_header_max_size 20 KB
    request_body_max_size 0 KB
    quick_abort_min 16 KB
    quick_abort_max 16 KB
    quick_abort_pct 95
    read_ahead_gap 16 KB
    negative_ttl 5 minutes
    positive_dns_ttl 6 seconds
    negative_dns_ttl 1 seconds
    range_offset_limit 0 KB
    client_lifetime 1 day
    shutdown_lifetime 30 seconds
    reply_header_max_size 20 KB
    announce_period 50 seconds
    announce_port 3131
    logfile_rotate 0
    tcp_recv_bufsize 0 bytes
    minimum_direct_hops 4
    minimum_direct_rtt 400
    store_avg_object_size 13 KB
    store_objects_per_bucket 20
    netdb_low 900
    netdb_high 1000
    netdb_ping_period 5 minutes
    maximum_single_addr_tries 1
    wccp_version 4
    wccp2_forwarding_method 1
    wccp2_return_method 1
    wccp2_assignment_method 1
    wccp2_service standard 0
    wccp2_weight 10000
    max_open_disk_fds 0
    digest_bits_per_entry 5
    digest_rebuild_period 1 seconds
    digest_rewrite_period 1 seconds
    digest_swapout_chunk_size 4096 bytes
    digest_rebuild_chunk_percentage 10
    high_response_time_warning 0
    high_page_fault_warning 0
    high_memory_warning 60 MB
    sleep_after_fork 0
    minimum_expiry_time 60 seconds
    authenticate_cache_garbage_interval 1 seconds
    authenticate_ttl 1 seconds
    authenticate_ip_ttl 20 seconds
    check_hostnames on
    dns_defnames off
    emulate_httpd_log off
    log_ip_on_direct on
    log_mime_hdrs off
    log_fqdn off
    ftp_passive on
    ftp_sanitycheck on
    ftp_telnet_protocol on
    allow_underscore on
    memory_pools on
    half_closed_clients on
    httpd_suppress_version_string off
    via on
    forwarded_for on
    log_icp_queries on
    client_db on
    icp_hit_stale off
    query_icmp off
    test_reachability off
    buffered_logs off
    reload_into_ims off
    global_internal_static on
    short_icon_urls off
    offline_mode off
    nonhierarchical_direct on
    prefer_direct off
    strip_query_terms on
    redirector_bypass off
    ignore_unknown_nameservers on
    client_persistent_connections on
    server_persistent_connections on
    persistent_connection_after_error off
    detect_broken_pconn off
    balance_on_multiple_ip on
    pipeline_prefetch off
    request_entities off
    ie_refresh off
    vary_ignore_expire off
    relaxed_header_parser on
    retry_on_error off
    wccp2_rebuild_wait on
    digest_generation on

    acl our_networks src 192.168.0.3
    acl localhost src 127.0.0.1/32
    acl to_localhost dst 127.0.0.0/8
    acl all src 0.0.0.0/0.0.0.0
    acl manager proto cache_object
    acl QUERY urlpath_regex cgi-bin \?
    acl apache rep_header Server ^Apache
    acl SSL_ports port 443
    acl Safe_ports port 80 # http
    acl Safe_ports port 21 # ftp
    acl Safe_ports port 443 # https
    acl Safe_ports port 70 # gopher
    acl Safe_ports port 210 # wais
    acl Safe_ports port 1025-65535 # unregistered ports
    acl Safe_ports port 280 # http-mgmt
    acl Safe_ports port 488 # gss-http
    acl Safe_ports port 591 # filemaker
    acl Safe_ports port 777 # multiling http
    acl Safe_ports port 5110 # skype
    acl CONNECT method CONNECT

    auth_param basic program /usr/lib/squid/ncsa_auth /etc/squid/passwd
    auth_param basic children 5
    auth_param basic realm kumbonet
    auth_param basic credentialsttl 2 hour
    auth_param basic casesensitive off

    acl need_auth proxy_auth REQUIRED

    http_access allow need_auth
    http_access allow localhost
    http_access allow our_networks
    http_reply_access allow all
    icp_access allow all
    http_access deny !Safe_ports
    http_access deny CONNECT !SSL_ports
    cache deny QUERY
    #ident_lookup_access deny all
    http_access allow all

    <>

    my clients use the proxy server IP address of 192.168.0.3 and should be prompted for a username and password

    Any ideas why the clients can not connect to the internet?

    I have ran out of ideas please help!!!

  2. #2
    hi,

    try to remove default input policy filter.

    and I think you dont need this :
    # if it is same system
    iptables -t nat -A PREROUTING -i $INTERNET -p tcp --dport 80 -j
    REDIRECT
    --to-port $SQUID_PORT

Similar Threads

  1. Replies: 2
    Last Post: 05-26-2014, 09:12 PM
  2. Squid and home networking
    By thinux in forum Redhat / Fedora
    Replies: 10
    Last Post: 01-13-2010, 08:46 AM
  3. Help in Networking
    By ikegreg40906 in forum Linux - Hardware, Networking & Security
    Replies: 2
    Last Post: 01-10-2007, 08:42 PM
  4. Networking 101 help
    By mcdougrs in forum Linux - Hardware, Networking & Security
    Replies: 5
    Last Post: 01-12-2003, 05:38 PM
  5. Networking
    By VampyreUK in forum Linux - General Topics
    Replies: 4
    Last Post: 05-27-2002, 12:51 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •