Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19
NAT-PT Problem ....
Results 1 to 3 of 3

Thread: NAT-PT Problem ....

  1. #1

    NAT-PT Problem ....

    My objective :
    internal network of ipv4 reach IPv6 nodes on the Internet....
    i don't have Cisco device...so i m trying with http://tomicki.net naptd-0.4.2.tar.gz....
    i have install naptd....now for configuration.....


    Code:
    [root@manage newroot]# usr/sbin/naptd-confmaker 
    Ataga IPv4/IPv6 NAPT Configuration Maker
    (c) 2005 by Lukasz Tomicki <tomicki@o2.pl>
    
    
    Do you want to create a new configuration? [Y/n]
    
    
    Do you want IPv4 addresses from the outside interfaces to be automatically used as part of the NAT pool? [Y/n]
    
    
    Do you want to configure additional address as part of your NAT pool? [y/N]
    
    
    Do you want to create a pool of public IPv4 addresses that will allow incoming connections to be dynamically mapped to appropriate IPv6 addresses? [y/N]
    
    
    Do you want to create static mappings of public IPv4 addresses that will allow incoming connections to reach IPv6 hosts? [y/N]
    
    
    Enter the name of the first inside (IPv6) interface that you want NAT-PT to listen on.
    interface (eth0 eth1 eth2 eth3 eth4 eth5 eth6 eth7 eth8 eth9 eth10 eth11): eth7
    
    
    Do you want to enter more interfaces? [y/N]
    n
    Enter the name of the first outside (IPv4) interface that you want NAT-PT to listen on.
    interface (eth0 eth1 eth2 eth3 eth4 eth5 eth6 eth7 eth8 eth9 eth10 eth11): eth5
    
    
    Do you want to enter more interfaces? [y/N]
    n
    Enter the TCP translation timeout in seconds [86400]: 
    Enter the UDP translation timeout in seconds [3600]: 
    Enter the ICMP translation timeout in seconds [30]: 
    
    
    Enter the IPv6 prefix that will be used as the destination for translations.
    prefix [2000:ffff::]: 
    
    
    Please enter the IPv4 address of the DNS server you are currently using.
    IPv4 DNS server: 10.104.1.1
    
    
    You can configure hosts for automatic DNS translation by using the DNS server below.
    IPv6 DNS Server: 2000:ffff::a68:101
    
    
    Thank you for choosing Ataga as you IPv4/IPv6 NAT-PT solution.
    Setup is now complete. Type 'naptd' to start NAT-PT.

    Now hows its done.......


    My eth5 ipv6 is 2000:470:1f01:115::4/64


    eth7 which is ipv4 is 10.10.7.1......... and connected pc with this ip PC-1 ---> 10.10.7.1






    Now as per the concept if i ping from PC-1 to any other machin...so in that machin it should be dispaly IPV6 in tcpdump...But NATING is not working perfectly.....
    please suggest me how to done NATING in IPV6 case....





    sorry for english..

  2. #2
    Moderator
    Advisor
    redhead's Avatar
    Join Date
    Jun 2001
    Location
    Copenhagen, Denmark
    Posts
    811
    Are you using ping6 instead of ping ?
    Don't worry Ma'am. We're university students, - We know what We're doing.
    'Ruiat coelum, fiat voluntas tua.'
    Datalogi - en livsstil; Intet liv, ingen stil.

  3. #3
    Yes I m using ping6 but still its not woking....

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •