Results 1 to 2 of 2

Thread: Howto route on chose my interface

  1. #1

    Unhappy Howto route on chose my interface

    Hello,
    I have a server with three network interface : eth0 eth1 and wlan0
    eth1 and wlan0 are connected to 2 ISP.
    eth0 is connected to my LAN.
    I have a load balancer who redirect the connection from the LAN to eth1 or wlan0 with the round robing algorithm. But I would like to do this :
    If somebody on my LAN want to connect on the port 443 the connection is always redirect through the wlan0 interface and never to the eth1.
    I have make many research but I don't find a solution.

    Please help me.

  2. #2

    Check out my solution

    Check out my thread on Network redundancy on how I used policy based routing on my server. Policy based routing allows you to route traffic based on flexible rule sets for each network adapter. Rules can be based on port numbers, src, dst ip addresses or marked/tagged packets.

    http://www.linuxhomenetworking.com/f...ad.php?t=19087

    My config was pretty much ripped from the site http://lartc.org/howto/lartc.rpdb.multiple-links.html

    There's also some good info on: http://www.policyrouting.org/PolicyR...NLINE/TOC.html

Similar Threads

  1. ipv6 route problem......
    By dashang in forum Linux - Hardware, Networking & Security
    Replies: 1
    Last Post: 11-16-2011, 06:47 AM
  2. Using two Lan card , how to route
    By ehdlim in forum Linux - General Topics
    Replies: 1
    Last Post: 01-22-2007, 03:56 PM
  3. Trace Route
    By GDR in forum Windows - General Topics
    Replies: 1
    Last Post: 01-14-2007, 05:26 AM
  4. This is why I chose GLO as my home
    By jasonjwebman in forum Linux - General Topics
    Replies: 6
    Last Post: 06-17-2002, 08:35 AM
  5. static route
    By aliko in forum Linux - Hardware, Networking & Security
    Replies: 2
    Last Post: 05-30-2002, 01:16 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •