Dear Friends when i'm testing my client to syncronize time with NTP server0.
I have used ntpdate command to check But it's giving the following error:
28 Dec 17:24:05 ntpdate[3740]: the NTP socket is in use, exiting
But I don't know what's the error. My client couldn't syncronize with NTP server: Also i'm attaching my server and client configuration files: Please help me. Thank you.

Server ntp config. file:


# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.

restrict default nomodify notrap noquery

# Permit all access over the loopback interface. This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1


# -- CLIENT NETWORK -------
# Permit systems on this network to synchronize with this
# time service. Do not permit those systems to modify the
# configuration of this service. Also, do not use those
# systems as peers for synchronization.
# restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap
restrict 151.2.119.31 mask 255.255.0.0 nomodify notrap


# --- OUR TIMESERVERS -----
#server 0.pool.ntp.org
#server 1.pool.ntp.org
#server 2.pool.ntp.org

server localhost

# --- NTP MULTICASTCLIENT ---
#multicastclient # listen on default 224.0.1.1
# restrict 224.0.1.1 mask 255.255.255.255 nomodify notrap
# restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap



# --- GENERAL CONFIGURATION ---
#
# Undisciplined Local Clock. This is a fake driver intended for backup
# and when no outside source of synchronized time is available. The
# default stratum is usually 3, but in this case we elect to use stratum
# 0. Since the server line does not have the prefer keyword, this driver
# is never used for synchronization, unless no other other
# synchronization source is available. In case the local host is
# controlled by some external source, such as an external oscillator or
# another protocol, the prefer keyword would cause the local host to
# disregard all other synchronization sources, unless the kernel
# modifications are in use and declare an unsynchronized condition.
#
fudge 127.127.1.0 stratum 10

#
# Drift file. Put this in a directory which the daemon can write to.
# No symbolic links allowed, either, since the daemon updates the file
# by creating a temporary in the same directory and then rename()'ing
# it to the file.
#
driftfile /var/lib/ntp/drift
broadcastdelay 0.008

#
# Keys file. If you want to diddle your server at run time, make a
# keys file (mode 600 for sure) and define the key number to be
# used for making requests.
#
# PLEASE DO NOT USE THE DEFAULT VALUES HERE. Pick your own, or remote
# systems might be able to reset your clock at will. Note also that
# ntpd is started with a -A flag, disabling authentication, that
# will have to be removed as well.
#
keys /etc/ntp/keys



My client config. file:



# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
server 151.2.119.30
restrict default nomodify notrap noquery

# Permit all access over the loopback interface. This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1


# -- CLIENT NETWORK -------
# Permit systems on this network to synchronize with this
# time service. Do not permit those systems to modify the
# configuration of this service. Also, do not use those
# systems as peers for synchronization.
# restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap


# --- OUR TIMESERVERS -----


# --- NTP MULTICASTCLIENT ---
#multicastclient # listen on default 224.0.1.1
# restrict 224.0.1.1 mask 255.255.255.255 nomodify notrap
# restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap



# --- GENERAL CONFIGURATION ---
#
# Undisciplined Local Clock. This is a fake driver intended for backup
# and when no outside source of synchronized time is available. The
# default stratum is usually 3, but in this case we elect to use stratum
# 0. Since the server line does not have the prefer keyword, this driver
# is never used for synchronization, unless no other other
# synchronization source is available. In case the local host is
# controlled by some external source, such as an external oscillator or
# another protocol, the prefer keyword would cause the local host to
# disregard all other synchronization sources, unless the kernel
# modifications are in use and declare an unsynchronized condition.
#
fudge 127.127.1.0 stratum 10

#
# Drift file. Put this in a directory which the daemon can write to.
# No symbolic links allowed, either, since the daemon updates the file
# by creating a temporary in the same directory and then rename()'ing
# it to the file.
#
driftfile /var/lib/ntp/drift
broadcastdelay 0.008

#
# Keys file. If you want to diddle your server at run time, make a
# keys file (mode 600 for sure) and define the key number to be
# used for making requests.
#
# PLEASE DO NOT USE THE DEFAULT VALUES HERE. Pick your own, or remote
# systems might be able to reset your clock at will. Note also that
# ntpd is started with a -A flag, disabling authentication, that
# will have to be removed as well.
#
keys /etc/ntp/keys
restrict 151.2.119.30 mask 255.255.255.255 nomodify notrap
server 151.2.119.30