Results 1 to 9 of 9

Thread: vsftpd : cannot login with non-anonymous user ...

Threaded View

  1. #1

    vsftpd : cannot login with non-anonymous user ...

    Hi,

    I would like to setup an ftp server on my Debian box.

    So I follow the "Server how to" writen here : http://www.siliconvalleyccie.com/lin...m#_Toc92808792

    Here my "vsftpd.conf"
    Code:
    # Example config file /etc/vsftpd.conf
    #
    # The default compiled in settings are fairly paranoid. This sample file
    # loosens things up a bit, to make the ftp daemon more usable.
    # Please see vsftpd.conf.5 for all compiled in defaults.
    #
    # READ THIS: This example file is NOT an exhaustive list of vsftpd options.
    # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
    # capabilities.
    #
    #
    # Run standalone?  vsftpd can run either from an inetd or as a standalone
    # daemon started from an initscript.
    listen=YES
    #
    # Run standalone with IPv6?
    # Like the listen parameter, except vsftpd will listen on an IPv6 socket
    # instead of an IPv4 one. This parameter and the listen parameter are mutually
    # exclusive.
    #listen_ipv6=YES
    #
    # Allow anonymous FTP? (Beware - allowed by default if you comment this out).
    anonymous_enable=YES
    #
    # Uncomment this to allow local users to log in.
    local_enable=YES
    #
    # Uncomment this to enable any form of FTP write command.
    write_enable=YES
    #
    # Default umask for local users is 077. You may wish to change this to 022,
    # if your users expect that (022 is used by most other ftpd's)
    #local_umask=022
    #
    # Uncomment this to allow the anonymous FTP user to upload files. This only
    # has an effect if the above global write enable is activated. Also, you will
    # obviously need to create a directory writable by the FTP user.
    #anon_upload_enable=YES
    #
    # Uncomment this if you want the anonymous FTP user to be able to create
    # new directories.
    #anon_mkdir_write_enable=YES
    #
    # Activate directory messages - messages given to remote users when they
    # go into a certain directory.
    dirmessage_enable=YES
    #
    # Activate logging of uploads/downloads.
    xferlog_enable=YES
    #
    # Make sure PORT transfer connections originate from port 20 (ftp-data).
    connect_from_port_20=YES
    #
    # If you want, you can arrange for uploaded anonymous files to be owned by
    # a different user. Note! Using "root" for uploaded files is not
    # recommended!
    #chown_uploads=YES
    #chown_username=whoever
    #
    # You may override where the log file goes if you like. The default is shown
    # below.
    #xferlog_file=/var/log/vsftpd.log
    #
    # If you want, you can have your log file in standard ftpd xferlog format
    #xferlog_std_format=YES
    #
    # You may change the default value for timing out an idle session.
    #idle_session_timeout=600
    #
    # You may change the default value for timing out a data connection.
    #data_connection_timeout=120
    #
    # It is recommended that you define on your system a unique user which the
    # ftp server can use as a totally isolated and unprivileged user.
    #nopriv_user=ftpsecure
    #
    # Enable this and the server will recognise asynchronous ABOR requests. Not
    # recommended for security (the code is non-trivial). Not enabling it,
    # however, may confuse older FTP clients.
    #async_abor_enable=YES
    #
    # By default the server will pretend to allow ASCII mode but in fact ignore
    # the request. Turn on the below options to have the server actually do ASCII
    # mangling on files when in ASCII mode.
    # Beware that turning on ascii_download_enable enables malicious remote parties
    # to consume your I/O resources, by issuing the command "SIZE /big/file" in
    # ASCII mode.
    # These ASCII options are split into upload and download because you may wish
    # to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
    # without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
    # on the client anyway..
    #ascii_upload_enable=YES
    #ascii_download_enable=YES
    #
    # You may fully customise the login banner string:
    ftpd_banner=Bienvenue sur vsftpd.
    #
    # You may specify a file of disallowed anonymous e-mail addresses. Apparently
    # useful for combatting certain DoS attacks.
    #deny_email_enable=YES
    # (default follows)
    #banned_email_file=/etc/vsftpd.banned_emails
    #
    # You may restrict local users to their home directories.  See the FAQ for
    # the possible risks in this before using chroot_local_user or
    # chroot_list_enable below.
    #chroot_local_user=YES
    #
    # You may specify an explicit list of local users to chroot() to their home
    # directory. If chroot_local_user is YES, then this list becomes a list of
    # users to NOT chroot().
    #chroot_list_enable=YES
    # (default follows)
    #chroot_list_file=/etc/vsftpd.chroot_list
    #
    # You may activate the "-R" option to the builtin ls. This is disabled by
    # default to avoid remote users being able to cause excessive I/O on large
    # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
    # the presence of the "-R" option, so there is a strong case for enabling it.
    #ls_recurse_enable=YES
    #
    #
    # Debian customization
    #
    # Some of vsftpd's settings don't fit the Debian filesystem layout by
    # default.  These settings are more Debian-friendly.
    #
    # This option should be the name of a directory which is empty.  Also, the
    # directory should not be writable by the ftp user. This directory is used
    # as a secure chroot() jail at times vsftpd does not require filesystem
    # access.
    secure_chroot_dir=/var/run/vsftpd
    #
    # This string is the name of the PAM service vsftpd will use.
    pam_service_name=vsftpd
    #
    # This option specifies the location of the RSA certificate to use for SSL
    # encrypted connections.
    rsa_cert_file=/etc/ssl/certs/vsftpd.pem
    I've followed the point 1 to 9 without error. I can login to my Debian box with the new user.

    When I would like to login with my new user via ftp, the answer is :

    Code:
    debian-debelles:/etc# ftp localhost
    Connected to localhost.localdomain.
    220 Bienvenue sur vsftpd.
    Name (localhost:root): senegal
    331 Please specify the password.
    Password:
    530 Login incorrect.
    Login failed.
    Here my "vsftpd.log" file :

    Code:
    Tue May  9 19:37:34 2006 [pid 1091] [ftp] OK LOGIN: Client "192.168.1.1", anon p                assword "user@anonymous.com"
    Tue May  9 19:38:21 2006 [pid 1100] CONNECT: Client "192.168.1.1"
    Tue May  9 19:38:23 2006 [pid 1099] [senegal] FAIL LOGIN: Client "192.168.1.1"
    Tue May  9 19:38:31 2006 [pid 1099] [senegal] FAIL LOGIN: Client "192.168.1.1"
    Tue May  9 20:01:22 2006 [pid 1305] CONNECT: Client "192.168.1.1"
    Tue May  9 20:01:23 2006 [pid 1304] [senegal] FAIL LOGIN: Client "192.168.1.1"
    Tue May  9 20:01:30 2006 [pid 1304] [senegal] FAIL LOGIN: Client "192.168.1.1"
    Tue May  9 20:22:54 2006 [pid 1400] CONNECT: Client "127.0.0.1"
    Tue May  9 20:23:07 2006 [pid 1399] [senegal] FAIL LOGIN: Client "127.0.0.1"
    debian-debelles:/var/log#
    Right now, I haven't any more idea to setup it correctly.

    Please, help me.

    Thanks for advance.
    Last edited by debellez; 05-09-2006 at 07:49 PM.

Similar Threads

  1. 1 user can't login in LDAP
    By naerey in forum Linux - Hardware, Networking & Security
    Replies: 1
    Last Post: 09-06-2011, 11:10 AM
  2. vsftpd 2.0.6 login trouble
    By bogdan in forum Linux - Hardware, Networking & Security
    Replies: 0
    Last Post: 05-20-2008, 12:16 PM
  3. VSFTPD with SSL/TLS - login incorrect
    By Phaelon in forum Linux - Hardware, Networking & Security
    Replies: 1
    Last Post: 05-20-2006, 11:44 PM
  4. single user login. no login at startup
    By donovan in forum Linux - General Topics
    Replies: 3
    Last Post: 01-12-2005, 08:57 AM
  5. Problem with new user login
    By geoffp in forum Announcements and Suggestions
    Replies: 3
    Last Post: 10-11-2003, 05:10 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •