the image is "bigger" than the display, i have to move mouse to left, right, down, up to see the rest of the desktop. i have the drivers from nvidia, installed them, edited xf86config , also tried with xf86cfg. i choosed the right hsync and vsync (from the monitors'manual). what i have done wrong ?
When you use xf86config it will ask something about having a bigger virtual desktop. I believe it's in the section where you adjust the screens aka 800x600 1024x768 etc. Just make sure you say no.
I'm not 100% sure on this next one, but I believe if you edit the XF86Config manually, you can enter ViewPort 0 0 into the Screens section to stop this. It would look like this:
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
You need to do that for every subsection you have so it will need to be added for depth 16, and 24 as well.
AMD Athlon 2200+ 1.8Ghz
1280MB PC-3200 CAS2.5 RAM
ATI Radeon 9600 Pro 128MB AGP
Western Digital WDC WD2500JB-00FUA0 250GB 7200 rpm ATA/133
Seagate ST3200822A 200GB 7200 rpm ATA/133
Western Digital WDC WD1200BB-00CAA1 120GB 7200 rpm ATA/133
Western Digital WDC WD800BB-00CAA1 80GB 7200 rpm ATA/133
Maxtor OneTouch 2HA43R32 1TB 7200 rpm USB 2.0
D-Link DFE-530TX+ 10/100 NIC
D-Link DWL-G520 Rev.A
Debian 5.0r1 Lenny