Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19
Network Not Working In Debian - Page 2
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 23

Thread: Network Not Working In Debian

  1. #11
    Junior Member
    Join Date
    Jun 2001
    Location
    Bahrain
    Posts
    51
    OK. I tried installing from a Debian Testing (Etch) netinstall I have and gotthe same problem. Here are some information:
    uname -a
    Code:
    Linux farabi 2.6.12-1-386 #1 Tue Sep 27 12:41:08 JST 2005 i686 GNU/Linux
    /etc/network/interfaces
    Code:
    # This file describes the network interfaces available on your system
    # and how to activate them. For more information, see interfaces(5).
    
    # The loopback network interface
    auto lo
    iface lo inet loopback
    
    # The primary network interface
    auto eth0
    iface eth0 inet static
       address 10.0.0.4
       netmask 255.255.255.0
       network 10.0.0.0
       broadcast 10.0.0.255
       gateway 10.0.0.138
       # dns-* options are implemented by the resolvconf package, if installed
       dns-nameservers 10.0.0.138
       dns-search lan
    ping -c 3 10.0.0.138
    Code:
    PING 10.0.0.138 (10.0.0.138) 56(84) bytes of data.
    From 10.0.0.4 icmp_seq=1 Destination Host Unreachable
    From 10.0.0.4 icmp_seq=2 Destination Host Unreachable
    From 10.0.0.4 icmp_seq=3 Destination Host Unreachable
    
    --- 10.0.0.138 ping statistics ---
    3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 1998ms
    , pipe 3
    ping -c 3 10.0.0.4
    Code:
    PING 10.0.0.4 (10.0.0.4) 56(84) bytes of data.
    64 bytes from 10.0.0.4: icmp_seq=1 ttl=64 time=0.057 ms
    64 bytes from 10.0.0.4: icmp_seq=2 ttl=64 time=0.033 ms
    64 bytes from 10.0.0.4: icmp_seq=3 ttl=64 time=0.052 ms
    
    --- 10.0.0.4 ping statistics ---
    3 packets transmitted, 3 received, 0% packet loss, time 1999ms
    rtt min/avg/max/mdev = 0.033/0.047/0.057/0.011 ms
    ping -c 3 127.0.0.1
    Code:
    PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data.
    64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.064 ms
    64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.056 ms
    64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.016 ms
    
    --- 127.0.0.1 ping statistics ---
    3 packets transmitted, 3 received, 0% packet loss, time 1999ms
    rtt min/avg/max/mdev = 0.016/0.045/0.064/0.021 ms
    ifconfig
    Code:
    eth0      Link encap:Ethernet  HWaddr 00:00:E2:4E:AC:F1  
              inet addr:10.0.0.4  Bcast:10.0.0.255  Mask:255.255.255.0
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
    
    lo        Link encap:Local Loopback  
              inet addr:127.0.0.1  Mask:255.0.0.0
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:23 errors:0 dropped:0 overruns:0 frame:0
              TX packets:23 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0 
              RX bytes:2016 (1.9 KiB)  TX bytes:2016 (1.9 KiB)
    dmesg | grep eth
    Code:
    e100: eth0: e100_probe: addr 0x80120000, irq 11, MAC addr 00:00:E2:4E:AC:F1
    e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
    NETDEV WATCHDOG: eth0: transmit timed out
    e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
    dmesg | grep e100
    Code:
    e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
    e100: Copyright(c) 1999-2005 Intel Corporation
    e100: eth0: e100_probe: addr 0x80120000, irq 11, MAC addr 00:00:E2:4E:AC:F1
    e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
    e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
    route
    Code:
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
    localnet        *               255.255.255.0   U     0      0        0 eth0
    default         10.0.0.138      0.0.0.0         UG    0      0        0 eth0

  2. #12
    Junior Member
    Join Date
    Jun 2001
    Location
    Bahrain
    Posts
    51
    more testing:
    dmesg |grep IRQ (Sarge)
    Code:
    ACPI: IRQ9 SCI: Level Trigger.
    ACPI: PCI Interrupt Link [PILA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [PILB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [PILC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [PILD] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [PILE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [PILF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [PILG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [PILH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    PCI: Using ACPI for IRQ routing
    ACPI: PCI Interrupt Link [PILA] enabled at IRQ 11
    ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI interrupt 0000:00:1f.2[D]: no GSI - using IRQ 3
    ACPI: PCI interrupt 0000:00:1f.3[B]: no GSI - using IRQ 9
    ACPI: PCI interrupt 0000:00:1f.4[C]: no GSI - using IRQ 10
    ACPI: PCI interrupt 0000:00:1f.5[B]: no GSI - using IRQ 9
    ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI interrupt 0000:01:01.0[A]: no GSI - using IRQ 9
    ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 11 (level, low) -> IRQ 11
    Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
    ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI interrupt 0000:00:1f.5[B]: no GSI - using IRQ 9
    i810: Intel ICH2 found at IO 0x8800 and 0x8400, MEM 0x0000 and 0x0000, IRQ 9
    ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI interrupt 0000:00:1f.2[D]: no GSI - using IRQ 3
     [<c01087f0>] do_IRQ+0x120/0x130
     [<c01087cb>] do_IRQ+0xfb/0x130
    Disabling IRQ #3
    ACPI: PCI interrupt 0000:00:1f.4[C]: no GSI - using IRQ 10
     [<c01087f0>] do_IRQ+0x120/0x130
     [<c01087cb>] do_IRQ+0xfb/0x130
    Disabling IRQ #10
    uhci_hcd 0000:00:1f.2: Unlink after no-IRQ?  Different ACPI or APIC settings may help.
    dmesg |grep IRQ (Knoppix 4.0)
    Code:
    PCI: Discovered primary peer bus 02 [IRQ]
    PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
    PCI: Found IRQ 3 for device 0000:00:1f.2
    PCI: Found IRQ 10 for device 0000:00:1f.4
    Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
    PCI: Found IRQ 10 for device 0000:01:08.0
    PCI: Found IRQ 11 for device 0000:01:00.0
    PCI: Sharing IRQ 11 with 0000:00:02.0
    PCI: Found IRQ 9 for device 0000:00:1f.5
    PCI: Sharing IRQ 9 with 0000:00:1f.3
    PCI: Sharing IRQ 9 with 0000:01:01.0
    i810: Intel ICH2 found at IO 0x8800 and 0x8400, MEM 0x0000 and 0x0000, IRQ 9
    PCI: Found IRQ 11 for device 0000:00:02.0
    PCI: Sharing IRQ 11 with 0000:01:00.0
    dmesg |grep IRQ (Etch)
    Code:
    ACPI: PCI Interrupt Link [PILA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [PILB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [PILC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [PILD] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [PILE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [PILF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [PILG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [PILH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    PCI: Using ACPI for IRQ routing
    Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
    ACPI: PCI Interrupt Link [PILA] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [PILA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:00:1f.5[B]: no GSI - using IRQ 9
    PCI: setting IRQ 9 as level-triggered
    i810: Intel ICH2 found at IO 0x8800 and 0x8400, MEM 0x0000 and 0x0000, IRQ 9
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [PILA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:00:1f.2[D]: no GSI - using IRQ 3
    PCI: setting IRQ 3 as level-triggered
     [<c012f3ac>] __do_IRQ+0xb0/0xc4
     [<c0105039>] do_IRQ+0x1d/0x28
     [<c010503e>] do_IRQ+0x22/0x28
    Disabling IRQ #3
    ACPI: PCI Interrupt 0000:00:1f.4[C]: no GSI - using IRQ 10
    PCI: setting IRQ 10 as level-triggered
     [<c012f3ac>] __do_IRQ+0xb0/0xc4
     [<c0105039>] do_IRQ+0x1d/0x28
     [<c010503e>] do_IRQ+0x22/0x28
    Disabling IRQ #10
    Notice that both Sarge and Etch disable IRQ 10, which is assigned by Knoppix, and windows to network port.

  3. #13
    Junior Member
    Join Date
    Jun 2001
    Location
    Bahrain
    Posts
    51
    Now.. since Debian Etch is using kernel 2.6.12, same as Knoppix 4.0, I think a kernel upgrade wont solve the problem.
    I also noticed that Debian Stable and Testing for a strange reason disable IRQ10 and assign IRQ11 to network port, while Windows and Knoppix work with IRQ10.
    I checked the BIOS and in the Onboard Peripherals it list only these:
    Serial Port 1 and 2
    Parallal Port
    Floppy, IDE, PS/2, USB Host Controllers
    Audio Chip
    and none is using IRQ10 or 11.
    So for now I think the problem is the IRQ.
    So how to change this setting? first at the boot -grub- as a kernel parameter, and then permenantly.

  4. #14
    Junior Member
    Join Date
    Jun 2001
    Location
    Bahrain
    Posts
    51
    First: I posted a reply to your post in LJR but it seems it didn't make it here, so this may seems like a repeat but..
    So some will work with e100 modules and some will only work with eepro100 modules.
    Knoppix 4.0 is using e100 driver for the same intel chip in the same computer and it works, it has newer kernel with an updated e100 driver version though
    Second, to eliminate it's really the NIC's problem, post the result of
    Code:
    ping 127.0.0.1
    And
    Code:
    ping 10.0.0.2
    If it still have host unreachable, then it's the problem with NIC setup rather than your network setup.
    Done as you see in the previous posts, and they work. strange!
    Third, try using DNS nameserver entries other than your own gateway/router. I've seen many problems with this kind of setup including mine which is Netgear Wireless AP/router. It just refused to render DNS requests from my Linux or too slow to response to *nix's TCP/IP stack.
    I don't see how it will reach a external DNS if it can't reach the router which is also my ADSL modem and my small home network/s gateway, but anyway.. I did change them to mach your's and they didn't work.
    I don't think you need to defind search entries unless you intend to use /etc/hosts as your local name resolution service.
    Will I do have my computer (Debian Etch), my wife's computer (Debian Etch, Network Not Working :-) ), my TV reciever (Linux based DreamBox) and a FileServer (SlackWare), and I am planning to add a Firewall (OpenBSD) and a Webserver (FreeBSD). So I think I will need to have names attached to them instead of calling them with IPs :-)

    The only thing I can think of it is either you have the wrong module or you have half-*** NIC card (hey, I have some of those before. They won't work unless I put in IRQ and IO manually in Red Hat 6.0 days).
    Well, the modem module seems OK (e100) as Knoppix is using it, if this is what you mean. The card itself, actually a builtin chipset, is working fine in both Windows and Knoppix 4.0 Live DVD, so this means it is OK too.
    Based on all the tests I did I think the IRQ is wrong, But I don't know how to change that yet.
    P.S --&gt; I like the way you ask questions with the commands you try and stuff. K++ for ya.
    I tried to give as much information as possible to assist whoever wants to help me, plus it help me find the problem, I hope. And it shows others that I did try to help and not just asking people to do everything for me :-)
    And Thank you for the Karma, although it is not here anymore. I lost all mine which showed that I am a nice person :-(
    Last edited by knight; 02-04-2006 at 08:42 AM.

  5. #15
    Junior Member
    Join Date
    Jun 2001
    Location
    Bahrain
    Posts
    51
    Quote Originally Posted by knight
    Options I have:
    1) Try changing the IRQ for the network port in Debian, I need to check how.
    2) Use a newer kernel no less than 2.6.12 which Knoppix uses.
    3) Use a NIC other than the buildin one.
    1) I still don't know how
    2) I tried a Debian Testing netinstall CD that has use a 2.6.12 kernel and got the same problem.
    3) I put a working pci network card used by my computer, which also run Debian Testing, but network still is not working.
    I will post information about this in another post

  6. #16
    Junior Member
    Join Date
    Jun 2001
    Location
    Bahrain
    Posts
    51
    I put a working PCI network card from my computer that also runs Debian Testing (Etch) into this computer and installed from a Debian Testing netinstall CD that has a 2.6.12 kernel.

    dmesg | grep eth
    Code:
    eth0: RealTek RTL8139 at 0x7400, 00:c0:26:59:8a:0b, IRQ 10
    eth0:  Identified 8139 chip type 'RTL-8139C'
    e100: eth1: e100_probe: addr 0x80101000, irq 11, MAC addr 00:00:E2:4E:AC:F1
    eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    NETDEV WATCHDOG: eth0: transmit timed out
    eth0: Transmit timeout, status 0c 0005 c07f media 10.
    eth0: Tx queue start entry 4  dirty entry 0.
    eth0:  Tx descriptor 0 is 0008a03c. (queue head)
    eth0:  Tx descriptor 1 is 0008a03c.
    eth0:  Tx descriptor 2 is 0008a03c.
    eth0:  Tx descriptor 3 is 0008a03c.
    eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    NETDEV WATCHDOG: eth0: transmit timed out
    eth0: Transmit timeout, status 0c 0005 c07f media 10.
    eth0: Tx queue start entry 4  dirty entry 0.
    eth0:  Tx descriptor 0 is 0008a03c. (queue head)
    eth0:  Tx descriptor 1 is 0008a03c.
    eth0:  Tx descriptor 2 is 0008a03c.
    eth0:  Tx descriptor 3 is 0008a03c.
    eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    NETDEV WATCHDOG: eth0: transmit timed out
    eth0: Transmit timeout, status 0c 0005 c07f media 10.
    eth0: Tx queue start entry 4  dirty entry 0.
    eth0:  Tx descriptor 0 is 0008a03c. (queue head)
    eth0:  Tx descriptor 1 is 0008a03c.
    eth0:  Tx descriptor 2 is 0008a03c.
    eth0:  Tx descriptor 3 is 0008a03c.
    eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    eth0: RealTek RTL8139 at 0x7400, 00:c0:26:59:8a:0b, IRQ 10
    eth0:  Identified 8139 chip type 'RTL-8139C'
    eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    NETDEV WATCHDOG: eth0: transmit timed out
    eth0: Transmit timeout, status 0c 0005 c07f media 10.
    eth0: Tx queue start entry 4  dirty entry 0.
    eth0:  Tx descriptor 0 is 0008a03c. (queue head)
    eth0:  Tx descriptor 1 is 0008a03c.
    eth0:  Tx descriptor 2 is 0008a03c.
    eth0:  Tx descriptor 3 is 0008a03c.
    eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    dmesg | grep 8139
    Code:
    8139too Fast Ethernet driver 0.9.27
    eth0: RealTek RTL8139 at 0x7400, 00:c0:26:59:8a:0b, IRQ 10
    eth0:  Identified 8139 chip type 'RTL-8139C'
    8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
    8139too Fast Ethernet driver 0.9.27
    eth0: RealTek RTL8139 at 0x7400, 00:c0:26:59:8a:0b, IRQ 10
    eth0:  Identified 8139 chip type 'RTL-8139C'
    I also did:
    Code:
    modprobe -r e100
    modprobe -r 8139cp
    modprobe -r 8139too
    modprobe 8139too
    ifup eth0
    it said something that it is connected to IRQ 10 but still it didn't work.
    dmesg | grep IRQ
    Code:
    ACPI: PCI Interrupt Link [PILA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [PILB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [PILC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [PILD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [PILE] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [PILF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [PILG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [PILH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    PCI: Using ACPI for IRQ routing
    Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
    ACPI: PCI Interrupt 0000:01:01.0[A]: no GSI - using IRQ 10
    PCI: setting IRQ 10 as level-triggered
    eth0: RealTek RTL8139 at 0x7400, 00:c0:26:59:8a:0b, IRQ 10
    ACPI: PCI Interrupt Link [PILA] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [PILA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:00:1f.5[B]: no GSI - using IRQ 10
    i810: Intel ICH2 found at IO 0x8800 and 0x8400, MEM 0x0000 and 0x0000, IRQ 10
     [<c012f3ac>] __do_IRQ+0xb0/0xc4
     [<c0105039>] do_IRQ+0x1d/0x28
     [<c010503e>] do_IRQ+0x22/0x28
    Disabling IRQ #10
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [PILA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:00:1f.2[D]: no GSI - using IRQ 10
    ACPI: PCI Interrupt 0000:00:1f.4[C]: no GSI - using IRQ 10
    ACPI: PCI Interrupt 0000:01:01.0[A]: no GSI - using IRQ 10
    eth0: RealTek RTL8139 at 0x7400, 00:c0:26:59:8a:0b, IRQ 10
    ifconfig
    Code:
    eth0      Link encap:Ethernet  HWaddr 00:C0:26:59:8A:0B  
              inet addr:10.0.0.4  Bcast:10.0.0.255  Mask:255.255.255.0
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
              Interrupt:10 Base address:0x7400 
    
    lo        Link encap:Local Loopback  
              inet addr:127.0.0.1  Mask:255.0.0.0
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:17 errors:0 dropped:0 overruns:0 frame:0
              TX packets:17 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0 
              RX bytes:1904 (1.8 KiB)  TX bytes:1904 (1.8 KiB)
    ping -c 3 10.0.0.138
    Code:
    PING 10.0.0.138 (10.0.0.138) 56(84) bytes of data.
    From 10.0.0.4 icmp_seq=1 Destination Host Unreachable
    From 10.0.0.4 icmp_seq=2 Destination Host Unreachable
    From 10.0.0.4 icmp_seq=3 Destination Host Unreachable
    
    --- 10.0.0.138 ping statistics ---
    3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 1999ms
    , pipe 3

  7. #17
    Junior Member
    Join Date
    Jun 2001
    Location
    Bahrain
    Posts
    51
    I thought posting the full dmesg may help solve find the problem, so here are 2, one from a working Knoppix 4.0, and the other from Debian Testing (network not working). As ther is no option to post attachments, I will post the actual content of them in seperate posts to make it easir for reading and refrence.
    Last edited by knight; 02-07-2006 at 03:28 PM. Reason: couldn't post dmesg in one post so I split each into Part 1 and Part 2, press Ctrl+A to copy and then Paste somewhere to read.

  8. #18
    Junior Member
    Join Date
    Jun 2001
    Location
    Bahrain
    Posts
    51
    dmesg (full from Knoppix 4.0) Part1
    Code:
    Linux version 2.6.12 (root@Knoppix) (gcc-Version 3.3.6 (Debian 1:3.3.6-7)) #2 SMP Tue Aug 9 23:20:52 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fed0000 (usable) BIOS-e820: 000000000fed0000 - 000000000fee0000 (reserved) BIOS-e820: 000000000fee0000 - 000000000fee8000 (ACPI data) BIOS-e820: 000000000fee8000 - 000000000ff00000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 254MB LOWMEM available. On node 0 totalpages: 65232 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61136 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ACER ) @ 0x000fe030 ACPI: RSDT (v001 ACER S58M 0x00000001 ACER 0x00000000) @ 0x0fee0000 ACPI: FADT (v001 ACER S58M 0x00000001 ACER 0x00000000) @ 0x0fee0028 ACPI: DSDT (v001 Acer S58M 0x00001000 MSFT 0x0100000a) @ 0x00000000 ACPI: BIOS age (2001) fails cutoff (2002), acpi=force is required to enable ACPI ACPI: Disabling ACPI support Allocating PCI resources starting at 0ff00000 (gap: 0ff00000:f0080000) Built 1 zonelists Kernel command line: ### isk_size=100000 init=/etc/init lang=us apm=power-off vga=791 initrd=minirt.gz nomce quiet BOOT_IMAGE=knoppix BOOT_IMAGE=linux Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (012ff000) Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 903.955 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 252632k/260928k available (1882k kernel code, 7616k reserved, 999k data, 296k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1699.84 BogoMIPS (lpj=849920) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. Checking for popad bug... OK. CPU0: Intel Pentium III (Coppermine) stepping 06 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs CPU0 attaching sched-domain: domain 0: span 00000001 groups: 00000001 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 858k freed NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xf0220, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f6880 PnPBIOS: PnP BIOS version 1.0, entry 0xf8310:0x0, dseg 0xf0000 PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:01.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Discovered primary peer bus 02 [IRQ] PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0 pnp: 00:08: ioport range 0x400-0x47f has been reserved pnp: 00:08: ioport range 0x480-0x4bf has been reserved pnp: 00:08: ioport range 0xe00-0xe7f has been reserved audit: initializing netlink socket (disabled) audit(1139334459.523:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API vesafb: framebuffer at 0x84000000, mapped to 0xd0880000, using 3072k, total 4096k vesafb: mode is 1024x768x16, linelength=2048, pages=0 vesafb: protected mode interface info at c000:02e5 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 2 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x8c00-0x8c07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x8c08-0x8c0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: ST320413A, ATA DISK drive hdb: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: CD-ROM 52X/AKH, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 128KiB hda: Host Protected Area detected. current capacity is 39102336 sectors (20020 MB) native capacity is 39102337 sectors (20020 MB) hda: Host Protected Area disabled. hda: 39102337 sectors (20020 MB) w/512KiB Cache, CHS=38792/16/63 hda: cache flushes not supported hda: hda1 hda2 hda3 hdb: ATAPI 48X DVD-ROM drive, 512kB Cache Uniform CD-ROM driver Revision: 3.20 hdc: ATAPI 52X CD-ROM drive, 192kB Cache libata version 1.11 loaded. mice: PS/2 mouse device common for all mice EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 7 Cannot allocate resource for EISA slot 8 EISA: Detected 0 cards.

  9. #19
    Junior Member
    Join Date
    Jun 2001
    Location
    Bahrain
    Posts
    51
    dmesg (full from Knoppix 4.0) Part2
    Code:
     NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 16Kbytes TCP established hash table entries: 8192 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 98304 bytes) TCP: Hash tables configured (established 8192 bind 8192) NET: Registered protocol family 1 NET: Registered protocol family 15 RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). input: AT Translated Set 2 keyboard on isa0060/serio0 seagate: ST0x/TMC-8xx not detected. Failed initialization of WD-7000 SCSI card! usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 PCI: Found IRQ 3 for device 0000:00:1f.2 PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: Intel Corporation 82801BA/BAM USB (Hub #1) uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.2: irq 3, io base 0x00008880 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Found IRQ 10 for device 0000:00:1f.4 PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: Intel Corporation 82801BA/BAM USB (Hub #2) uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1f.4: irq 10, io base 0x000088c0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Initializing USB Mass Storage driver... usb 1-1: new low speed USB device using uhci_hcd and address 2 usb 1-2: new low speed USB device using uhci_hcd and address 3 usbcore: registered new driver usb-storage USB Mass Storage support registered. ieee1394: Initialized config rom entry `ip1394' sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org> ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1) Unable to identify CD-ROM format. VFS: Can't find an ext2 filesystem on dev hda. FAT: bogus number of FAT structure VFS: Can't find a valid FAT filesystem on dev hda. ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A cloop: Initializing cloop v2.02 cloop: loaded (max 8 devices) cloop: /cdrom/KNOPPIX/KNOPPIX: 82157 blocks, 65536 bytes/block, largest block is 65562 bytes. ISO 9660 Extensions: RRIP_1991A cloop: losetup_file: 28811 blocks, 65536 bytes/block, largest block is 65562 bytes. ISO 9660 Extensions: RRIP_1991A Registering unionfs 20050811-1552 Freeing unused kernel memory: 296k freed Real Time Clock Driver v1.12 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Linux Kernel Card Services options: [pci] [cardbus] [pm] usbcore: registered new driver hiddev input: USB HID v1.00 Mouse [Logitech] on usb-0000:00:1f.2-1 input: USB HID v1.10 Keyboard [NOVATEK USB Multimedia Keyboard] on usb-0000:00:1f.2-2 input: USB HID v1.10 Device [NOVATEK USB Multimedia Keyboard] on usb-0000:00:1f.2-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver ts: Compaq touchscreen protocol output Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] hw_random: RNG not detected e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation PCI: Found IRQ 10 for device 0000:01:08.0 e100: eth0: e100_probe: addr 0x80120000, irq 10, MAC addr 00:00:E2:4E:AC:F1 PCI: Found IRQ 11 for device 0000:01:00.0 PCI: Sharing IRQ 11 with 0000:00:02.0 Intel 810 + AC97 Audio, version 1.01, 22:38:37 Aug 9 2005 PCI: Found IRQ 9 for device 0000:00:1f.5 PCI: Sharing IRQ 9 with 0000:00:1f.3 PCI: Sharing IRQ 9 with 0000:01:01.0 PCI: Setting latency timer of device 0000:00:1f.5 to 64 i810: Intel ICH2 found at IO 0x8800 and 0x8400, MEM 0x0000 and 0x0000, IRQ 9 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 ac97_codec: AC97 Audio codec, id: ADS72 (Analog Devices AD1881A) i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2 i810_audio: setting clocking to 48813 NTFS driver 2.1.22 [Flags: R/W MODULE]. NTFS volume version 3.1. Adding 538168k swap on /dev/hda2. Priority:-1 extents:1 ReiserFS: hda3: found reiserfs format "3.6" with standard journal ReiserFS: hda3: using ordered data mode ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda3: checking transaction log (hda3) ReiserFS: hda3: Using r5 hash to sort names e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex NET: Registered protocol family 17 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel i815 Chipset. agpgart: detected 4MB dedicated video ram. agpgart: AGP aperture is 64M @ 0x88000000 e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [drm] Initialized drm 1.0.0 20040925 PCI: Enabling device 0000:00:02.0 (0004 -> 0006) PCI: Found IRQ 11 for device 0000:00:02.0 PCI: Sharing IRQ 11 with 0000:01:00.0 [drm] Initialized i810 1.4.0 20030605 on minor 0: Intel Corporation 82815 CGC [Chipset Graphics Controller] usb 2-1: new full speed USB device using uhci_hcd and address 2 hub 2-1:1.0: USB hub found hub 2-1:1.0: 1 port detected usb 2-1.1: new full speed USB device using uhci_hcd and address 3 scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning Vendor: LG Model: X-TICK 2.0 Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 507904 512-byte hdwr sectors (260 MB) sda: Write Protect is off sda: Mode Sense: 00 26 00 00 sda: assuming drive cache: write through SCSI device sda: 507904 512-byte hdwr sectors (260 MB) sda: Write Protect is off sda: Mode Sense: 00 26 00 00 sda: assuming drive cache: write through sda: sda1 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 usb-storage: device scan complete ReiserFS: hda3: found reiserfs format "3.6" with standard journal ReiserFS: hda3: using ordered data mode ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda3: checking transaction log (hda3) ReiserFS: hda3: Using r5 hash to sort names NET: Registered protocol family 10 Disabled Privacy Extensions on device c0381d00(lo) IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present

  10. #20
    Junior Member
    Join Date
    Jun 2001
    Location
    Bahrain
    Posts
    51
    dmesg (full from Debian Testing) Part 1
    Code:
     Linux version 2.6.12-1-386 (horms@tabatha.lab.ultramonkey.org) (gcc version 4.0.2 20050917 (prerelease) (Debian 4.0.1-8)) #1 Tue Sep 27 12:41:08 JST 2005
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
     BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
     BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000000fed0000 (usable)
     BIOS-e820: 000000000fed0000 - 000000000fee0000 (reserved)
     BIOS-e820: 000000000fee0000 - 000000000fee8000 (ACPI data)
     BIOS-e820: 000000000fee8000 - 000000000ff00000 (ACPI NVS)
     BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    254MB LOWMEM available.
    On node 0 totalpages: 65232
      DMA zone: 4096 pages, LIFO batch:1
      Normal zone: 61136 pages, LIFO batch:31
      HighMem zone: 0 pages, LIFO batch:1
    DMI 2.3 present.
    ACPI: RSDP (v000 ACER                                  ) @ 0x000fe030
    ACPI: RSDT (v001 ACER   S58M     0x00000001 ACER 0x00000000) @ 0x0fee0000
    ACPI: FADT (v001 ACER   S58M     0x00000001 ACER 0x00000000) @ 0x0fee0028
    ACPI: DSDT (v001   Acer   S58M   0x00001000 MSFT 0x0100000a) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x408
    Allocating PCI resources starting at 0ff00000 (gap: 0ff00000:f0080000)
    Built 1 zonelists
    Kernel command line: root=/dev/hda3 ro 
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffd000 (011ff000)
    Initializing CPU#0
    PID hash table entries: 1024 (order: 10, 16384 bytes)
    Detected 863.892 MHz processor.
    Using pmtmr for high-res timesource
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 253868k/260928k available (1540k kernel code, 6456k reserved, 756k data, 236k init, 0k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay loop... 1564.67 BogoMIPS (lpj=782336)
    Security Framework v1.0.0 initialized
    SELinux:  Disabled at boot.
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
    CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
    CPU: Intel Pentium III (Coppermine) stepping 06
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    Checking for popad bug... OK.
    ACPI: setting ELCR to 0200 (from 0e08)
    checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
    Freeing initrd memory: 1448k freed
          NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xf0220, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [PILA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [PILB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [PILC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [PILD] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [PILE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [PILF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [PILG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [PILH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00)
    Last edited by knight; 02-07-2006 at 03:35 PM.

Similar Threads

  1. network card stop working
    By nikgau in forum Linux - Hardware, Networking & Security
    Replies: 1
    Last Post: 12-12-2012, 06:00 AM
  2. Working the details of my SOHO Network
    By Dark Horse in forum Linux - Hardware, Networking & Security
    Replies: 1
    Last Post: 07-09-2007, 04:02 AM
  3. Installing Debian thru windows network
    By trommaster in forum Ubuntu / Debian
    Replies: 1
    Last Post: 09-03-2002, 05:50 AM
  4. Migration to Debian is not working :(
    By Feztaa in forum Linux - General Topics
    Replies: 50
    Last Post: 11-29-2001, 04:23 PM
  5. Installing Debian via network
    By CP in forum Linux - Software, Applications & Programming
    Replies: 8
    Last Post: 11-24-2001, 05:06 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •