Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: cpu too hot??

  1. #1

    cpu too hot??

    Hey guys I just installed ubuntu on my laptop and I keep getting this eveytime I run seti

    Message from syslogd@localhost at Sat Dec 18 01:18:31 2004 ...
    localhost kernel: CPU0: Temperature above threshold

    Message from syslogd@localhost at Sat Dec 18 01:18:31 2004 ...
    localhost kernel: CPU0: Running in modulated clock mode

    and it just keeps on going and going and going...i'll stop there :P


  2. #2

    Re:cpu too hot??

    what's the temperature of the cpu?

  3. #3

    Re:cpu too hot??

    [quote author=Countach44 link=board=3;threadid=10074;start=0#msg91285 date=1103397341]
    what's the temperature of the cpu?
    [/quote]

    Either check your BIOS upon reboot for your CPU temp, or see this thread for realtime monitoring options.

  4. #4

    Re:cpu too hot??

    I get this when I run sensors-detect

    Code:
    Sorry, no chips were detected.
     Either your sensors are not supported, or they are
     connected to an I2C bus adapter that we do not support.
     See doc/FAQ, doc/lm_sensors-FAQ.html, or
     http://www2.lm-sensors.nu/~lm78/cvs/...nsors-FAQ.html
     (FAQ #4.24.3) for further information.
     If you find out what chips are on your board, see
     http://secure.netroedge.com/~lm78/newdrivers.html for driver status.
    I have no clue what motherboard I have because it's a laptop

  5. #5

    Re:cpu too hot??

    hey mojo - what kind of laptop?

  6. #6

    Re:cpu too hot??


  7. #7

    Re:cpu too hot??

    Does your BIOS report the temperature?

  8. #8

    Re:cpu too hot??

    hey mojo - what does senssors-detect come up with ? i am pretty sure would use this chipset given the specs:
    http://developer.intel.com/design/ch...bile/845mp.htm - but that won't tell the sensor type...

  9. #9

    Re:cpu too hot??

    I havent check the bios yet but i'm going to later

    this is the output of sensors-detect

    Code:
    This program will help you determine which I2C/SMBus modules you need to
    load to use lm_sensors most effectively. You need to have i2c and
    lm_sensors installed before running this program.
    Also, you need to be `root', or at least have access to the *
    files, for most things.
    If you have patched your kernel and have some drivers built in, you can
    safely answer NO if asked to load some modules. In this case, things may
    seem a bit confusing, but they will still work.
    
    It is generally safe and recommended to accept the default answers to all
    questions, unless you know what you're doing.
    
     As you are not root, we can't determine your system vendor.
     IF THIS IS AN IBM THINKPAD, PRESS CTRL-C NOW!
     IBM Thinkpads have a severely broken i2c/SMBus implementation, just scanning
     the bus will break your Thinkpad forever!
     If this is a non-Thinkpad IBM, we still suggest you press CTRL+C. We have
     had users reporting system breakage on other IBM systems as well.
    
     We can start with probing for (PCI) I2C or SMBus adapters.
     You do not need any special privileges for this.
     Do you want to probe now? (YES/no):
    xquizit@lappy:~ $ sudo sensors-detect
    Password:
    
    This program will help you determine which I2C/SMBus modules you need to
    load to use lm_sensors most effectively. You need to have i2c and
    lm_sensors installed before running this program.
    Also, you need to be `root', or at least have access to the *
    files, for most things.
    If you have patched your kernel and have some drivers built in, you can
    safely answer NO if asked to load some modules. In this case, things may
    seem a bit confusing, but they will still work.
    
    It is generally safe and recommended to accept the default answers to all
    questions, unless you know what you're doing.
    
     We can start with probing for (PCI) I2C or SMBus adapters.
     You do not need any special privileges for this.
     Do you want to probe now? (YES/no):
    Probing for PCI bus adapters...
    Use driver `i2c-sis96x' for device 00:02.1: Silicon Integrated Systems SMBus Controller
    Probe succesfully concluded.
    
    We will now try to load each adapter module in turn.
    Module `i2c-sis96x' already loaded.
    If you have undetectable or unsupported adapters, you can have them
    scanned by manually loading the modules before running this script.
    
     To continue, we need module `i2c-dev' to be loaded.
     If it is built-in into your kernel, you can safely skip this.
    i2c-dev is already loaded.
    
     We are now going to do the adapter probings. Some adapters may hang halfway
     through; we can't really help that. Also, some chips will be double detected;
     we choose the one with the highest confidence value in that case.
     If you found that the adapter hung after probing a certain address, you can
     specify that address to remain unprobed. That often
     includes address 0x69 (clock chip).
    
    Next adapter: SiS96x SMBus adapter at 0x0c00 (Algorithm unavailable)
    Do you want to scan it? (YES/no/selectively):
    Can't open 0
    
    Some chips are also accessible through the ISA bus. ISA probes are
    typically a bit more dangerous, as we have to write to I/O ports to do
    this. This is usually safe though.
    
    Do you want to scan the ISA bus? (YES/no):
    Probing for `National Semiconductor LM78'
      Trying address 0x0290... Failed!
    Probing for `National Semiconductor LM78-J'
      Trying address 0x0290... Failed!
    Probing for `National Semiconductor LM79'
      Trying address 0x0290... Failed!
    Probing for `Winbond W83781D'
      Trying address 0x0290... Failed!
    Probing for `Winbond W83782D'
      Trying address 0x0290... Failed!
    Probing for `Winbond W83627HF'
      Trying address 0x0290... Failed!
    Probing for `Winbond W83697HF'
      Trying address 0x0290... Failed!
    Probing for `Silicon Integrated Systems SIS5595'
      Trying general detect... Failed!
    Probing for `VIA Technologies VT82C686 Integrated Sensors'
      Trying general detect... Failed!
    Probing for `VIA Technologies VT8231 Integrated Sensors'
      Trying general detect... Failed!
    Probing for `ITE IT8705F / IT8712F / SiS 950'
      Trying address 0x0290... Failed!
    Probing for `IPMI BMC KCS'
      Trying address 0x0ca0... Failed!
    Probing for `IPMI BMC SMIC'
      Trying address 0x0ca8... Failed!
    
    Some Super I/O chips may also contain sensors. Super I/O probes are
    typically a bit more dangerous, as we have to write to I/O ports to do
    this. This is usually safe though.
    
    Do you want to scan for Super I/O sensors? (YES/no):
    Probing for `ITE 8702F Super IO Sensors'
      Failed! (0xea11)
    Probing for `ITE 8705F Super IO Sensors'
      Failed! (0xea11)
    Probing for `ITE 8712F Super IO Sensors'
      Failed! (0xea11)
    Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
      Failed! (0xea)
    Probing for `Nat. Semi. PC87360 Super IO Fan Sensors'
      Failed! (0xea)
    Probing for `Nat. Semi. PC87363 Super IO Fan Sensors'
      Failed! (0xea)
    Probing for `Nat. Semi. PC87364 Super IO Fan Sensors'
      Failed! (0xea)
    Probing for `Nat. Semi. PC87365 Super IO Fan Sensors'
      Failed! (0xea)
    Probing for `Nat. Semi. PC87365 Super IO Voltage Sensors'
      Failed! (0xea)
    Probing for `Nat. Semi. PC87365 Super IO Thermal Sensors'
      Failed! (0xea)
    Probing for `Nat. Semi. PC87366 Super IO Fan Sensors'
      Failed! (0xea)
    Probing for `Nat. Semi. PC87366 Super IO Voltage Sensors'
      Failed! (0xea)
    Probing for `Nat. Semi. PC87366 Super IO Thermal Sensors'
      Failed! (0xea)
    Probing for `Nat. Semi. PC87372 Super IO Fan Sensors'
      Failed! (0xea)
    Probing for `Nat. Semi. PC87373 Super IO Fan Sensors'
      Failed! (0xea)
    Probing for `Nat. Semi. PC8741x Super IO'
      Failed! (0xea)
    Probing for `SMSC 47B27x Super IO Fan Sensors'
      Failed! (0xea)
    Probing for `SMSC 47M10x/13x Super IO Fan Sensors'
      Failed! (0xea)
    Probing for `SMSC 47M14x Super IO Fan Sensors'
      Failed! (0xea)
    Probing for `SMSC 47M15x/192 Super IO Fan Sensors'
      Failed! (0xea)
    Probing for `SMSC 47S42x Super IO Fan Sensors'
      Failed! (0xea)
    Probing for `SMSC 47S45x Super IO Fan Sensors'
      Failed! (0xea)
    Probing for `SMSC 47M172 Super IO'
      Failed! (0xea)
    Probing for `VT1211 Super IO Sensors'
      Failed! (0xea)
    Probing for `Winbond W83627HF Super IO Sensors'
      Failed! (0xea)
    Probing for `Winbond W83627THF Super IO Sensors'
      Failed! (0xea)
    Probing for `Winbond W83637HF Super IO Sensors'
      Failed! (0xea)
    Probing for `Winbond W83697HF Super IO Sensors'
      Failed! (0xea)
    Probing for `Winbond W83697SF/UF Super IO PWM'
      Failed! (0xea)
    Probing for `Winbond W83L517D Super IO'
      Failed! (0xea)
    
    Do you want to scan for secondary Super I/O sensors? (YES/no):
    Probing for `ITE 8702F Super IO Sensors'
      Failed! (0xec11)
    Probing for `ITE 8705F Super IO Sensors'
      Failed! (0xec11)
    Probing for `ITE 8712F Super IO Sensors'
      Failed! (0xec11)
    Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
      Failed! (0xec)
    Probing for `Nat. Semi. PC87360 Super IO Fan Sensors'
      Failed! (0xec)
    Probing for `Nat. Semi. PC87363 Super IO Fan Sensors'
      Failed! (0xec)
    Probing for `Nat. Semi. PC87364 Super IO Fan Sensors'
      Failed! (0xec)
    Probing for `Nat. Semi. PC87365 Super IO Fan Sensors'
      Failed! (0xec)
    Probing for `Nat. Semi. PC87365 Super IO Voltage Sensors'
      Failed! (0xec)
    Probing for `Nat. Semi. PC87365 Super IO Thermal Sensors'
      Failed! (0xec)
    Probing for `Nat. Semi. PC87366 Super IO Fan Sensors'
      Failed! (0xec)
    Probing for `Nat. Semi. PC87366 Super IO Voltage Sensors'
      Failed! (0xec)
    Probing for `Nat. Semi. PC87366 Super IO Thermal Sensors'
      Failed! (0xec)
    Probing for `Nat. Semi. PC87372 Super IO Fan Sensors'
      Failed! (0xec)
    Probing for `Nat. Semi. PC87373 Super IO Fan Sensors'
      Failed! (0xec)
    Probing for `Nat. Semi. PC8741x Super IO'
      Failed! (0xec)
    Probing for `SMSC 47B27x Super IO Fan Sensors'
      Failed! (0xec)
    Probing for `SMSC 47M10x/13x Super IO Fan Sensors'
      Failed! (0xec)
    Probing for `SMSC 47M14x Super IO Fan Sensors'
      Failed! (0xec)
    Probing for `SMSC 47M15x/192 Super IO Fan Sensors'
      Failed! (0xec)
    Probing for `SMSC 47S42x Super IO Fan Sensors'
      Failed! (0xec)
    Probing for `SMSC 47S45x Super IO Fan Sensors'
      Failed! (0xec)
    Probing for `SMSC 47M172 Super IO'
      Failed! (0xec)
    Probing for `VT1211 Super IO Sensors'
      Failed! (0xec)
    Probing for `Winbond W83627HF Super IO Sensors'
      Failed! (0xec)
    Probing for `Winbond W83627THF Super IO Sensors'
      Failed! (0xec)
    Probing for `Winbond W83637HF Super IO Sensors'
      Failed! (0xec)
    Probing for `Winbond W83697HF Super IO Sensors'
      Failed! (0xec)
    Probing for `Winbond W83697SF/UF Super IO PWM'
      Failed! (0xec)
    Probing for `Winbond W83L517D Super IO'
      Failed! (0xec)
    
     Sorry, no chips were detected.
     Either your sensors are not supported, or they are
     connected to an I2C bus adapter that we do not support.
     See doc/FAQ, doc/lm_sensors-FAQ.html, or
     http://www2.lm-sensors.nu/~lm78/cvs/...nsors-FAQ.html
     (FAQ #4.24.3) for further information.
     If you find out what chips are on your board, see
     http://secure.netroedge.com/~lm78/newdrivers.html for driver status.

  10. #10

    Re:cpu too hot??

    I've got an averatec 3225, dunno how similar they are mobo wise, but the temperature sensors on this thing are kinda broken under linux. By default they show as 0C, but if you warm boot it it'll show the temp it was at boot up. But no way to get live stats from it. Also I think the fans blow the wrong way sometimes...

    If it doesn't do anything, just errors, why worry about it?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •