Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19

Warning: Function ereg() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 4

Warning: Function split() is deprecated in ..../includes/class_postbit.php(345) : eval()'d code on line 19
Gentoo XF86Config
Results 1 to 10 of 10

Thread: Gentoo XF86Config

Hybrid View

  1. #1

    Gentoo XF86Config

    Hey guys I installed gentoo on another system yesterday and I have a problem starting X I downloaed the nvidia-glx(kernel) via emerge.

    I can get the nvidia bootsplash sometimes...but I keep getting the same f**kin error "no screen sound" or something like that. and when I do get it go work the whole system locks up > > have have tried /etc/X11R6/bin/xf86config.

    the video card is a GeForce FX5200 128ddr and an optical mouse (usb) same as mine when I tried debian.

    how much is 128 in kilobytes ???

    here is the XF86config

    # File generated by xf86config.

    #
    # Copyright (c) 1999 by The XFree86 Project, Inc.
    #
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software&quot,
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    #
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    #
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    #
    # Except as contained in this notice, the name of the XFree86 Project shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from the
    # XFree86 Project.
    #

    # ************************************************** ********************
    # Refer to the XF86Config(4/5) man page for details about the format of
    # this file.
    # ************************************************** ********************

    # ************************************************** ********************
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    # ************************************************** ********************
    #
    Section "Module"

    # This loads the DBE extension module.

    Load "dbe" # Double buffer extension

    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection

    # This loads the Type1 and FreeType font modules
    Load "type1"
    Load "speedo"
    # Load "freetype"
    # Load "xtt"

    # This loads the GLX module
    Load "glx"
    # This loads the DRI module
    # Load "dri"

    EndSection

    # ************************************************** ********************
    # Files section. This allows default font and rgb paths to be set
    # ************************************************** ********************

    Section "Files"

    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db&quot. There is normally
    # no need to change the default.

    RgbPath"/usr/X11R6/lib/X11/rgb"

    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    #
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list (or comment them out).
    #

    FontPath "/usr/X11R6/lib/X11/fonts/local/"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
    # FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
    # FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

    # The module search path. The default path is shown here.

    # ModulePath "/usr/X11R6/lib/modules"

    EndSection

    # ************************************************** ********************
    # Server flags section.
    # ************************************************** ********************

    Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging

    # Option "NoTrapSignals"

    # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.

    # Option "DontVTSwitch"

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.

    # Option "DontZap"

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.

    # Option "Dont Zoom"

    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.

    # Option "DisableVidModeExtension"

    # Uncomment this to enable the use of a non-local xvidtune client.

    # Option "AllowNonLocalXvidtune"

    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.

    # Option "DisableModInDev"

    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).

    # Option "AllowNonLocalModInDev"

    EndSection

    # ************************************************** ********************
    # Input devices
    # ************************************************** ********************

    # ************************************************** ********************
    # Core keyboard's InputDevice section
    # ************************************************** ********************

    Section "InputDevice"

    Identifier"Keyboard1"
    Driver"Keyboard"

    # For most OSs the protocol can be omitted (it defaults to "Standard&quot.
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.

    # Option "Protocol" "Xqueue"

    Option "AutoRepeat" "500 30"

    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option"Xleds" "1 2 3"

    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"

    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc102"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"

    # These are the default XKB settings for XFree86
    # Option "XkbRules" "xfree86"
    # Option "XkbModel" "pc101"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""

    # Option "XkbDisable"

    Option "XkbRules""xfree86"
    Option "XkbModel""pc101"
    Option "XkbLayout""us"

    EndSection


    # ************************************************** ********************
    # Core Pointer's InputDevice section
    # ************************************************** ********************

    Section "InputDevice"

    # Identifier and driver

    Identifier"Mouse1"
    Driver"mouse"
    Option "Protocol" "IMPS/2"
    Option "Device" "/dev/input/mice"

    # Mouse-speed setting for PS/2 mouse.

    # Option "Resolution""256"

    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.

    # Option "Protocol""Xqueue"

    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.

    # Option "BaudRate""9600"
    # Option "SampleRate""150"

    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"

    # ChordMiddle is an option for some 3-button Logitech mice

    # Option "ChordMiddle"

    EndSection


    # ************************************************** ********************
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the XF86Config man page for a description of the options.
    # ************************************************** ********************
    #
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection

    # ************************************************** ********************
    # Monitor section
    # ************************************************** ********************

    # Any number of monitor sections may be present

    Section "Monitor"

    Identifier "My Monitor"

    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync 31.5 - 57.0

    # HorizSync30-64 # multisync
    # HorizSync31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync15-25, 30-50 # multiple ranges of sync frequencies

    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-100

    EndSection


    # ************************************************** ********************
    # Graphics device section
    # ************************************************** ********************

    # Any number of graphics device sections may be present

    # Standard VGA Device:

    Section "Device"
    Identifier"Standard VGA"
    VendorName"Unknown"
    BoardName"Unknown"

    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.

    # Chipset"generic"

    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.

    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.

    # BusID "PCI:0:10:0"

    # VideoRam256

    # Clocks25.2 28.3

    EndSection

    # Device configured by xf86config:

    Section "Device"
    Identifier "NVIDIA GeForce"
    Driver "nvidia"
    #VideoRam 4096
    # Insert Clocks lines here if appropriate
    EndSection


    # ************************************************** ********************
    # Screen sections
    # ************************************************** ********************

    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "NVIDIA GeForce"
    Monitor "My Monitor"
    DefaultDepth 24

    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection

    # ************************************************** ********************
    # ServerLayout sections.
    # ************************************************** ********************

    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.

    Section "ServerLayout"

    # The Identifier line must be present
    Identifier "Simple Layout"

    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.

    Screen "Screen 1"

    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

    EndSection

    # Section "DRI"
    # Mode 0666
    # EndSection

    TIA
    Michael

  2. #2

    Re:Gentoo XF86Config

    What is the error?

  3. #3

    Re:Gentoo XF86Config


    XFree86 Version 4.3.0
    Release Date: 27 February 2003
    X Protocol Version 11, Revision 0, Release 6.6
    Build Operating System: Linux 2.4.22-gentoo-r5 i686 [ELF]
    Build Date: 05 February 2004
    Before reporting problems, check http://www.XFree86.Org/
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/XFree86.0.log", Time: Fri Feb 6 10:02:52 2004
    (==) Using config file: "/etc/X11/XF86Config"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) | |-->Monitor "My Monitor"
    (**) | |-->Device "NVIDIA GeForce"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xfree86"
    (**) XKB: rules: "xfree86"
    (**) Option "XkbModel" "pc101"
    (**) XKB: model: "pc101"
    (**) Option "XkbLayout" "us"
    (**) XKB: layout: "us"
    (==) Keyboard: CustomKeycode disabled
    (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
    (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
    (==) ModulePath set to "/usr/X11R6/lib/modules"
    Using vt 7
    (--) using VT number 7

    (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
    (II) Module ABI versions:
    XFree86 ANSI C Emulation: 0.2
    XFree86 Video Driver: 0.6
    XFree86 XInput driver : 0.4
    XFree86 Server Extension : 0.2
    XFree86 Font Renderer : 0.4
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
    (II) Module bitmap: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/X11R6/lib/modules/libpcidata.a
    (II) Module pcidata: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.6
    (II) PCI: Probing config type using method 1
    (II) PCI: Config type is 1
    (II) PCI: stages = 0x03, oldVal1 = 0x8001004c, mode1Res1 = 0x80000000
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 1106,3189 card 1458,5000 rev 00 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 1106,b168 card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:0b:0: chip 1102,0002 card 1102,8027 rev 08 class 04,01,00 hdr 80
    (II) PCI: 00:0b:1: chip 1102,7002 card 1102,0020 rev 08 class 09,80,00 hdr 80
    (II) PCI: 00:10:0: chip 1106,3038 card 1458,5004 rev 80 class 0c,03,00 hdr 80
    (II) PCI: 00:10:1: chip 1106,3038 card 1458,5004 rev 80 class 0c,03,00 hdr 80
    (II) PCI: 00:10:2: chip 1106,3038 card 1458,5004 rev 80 class 0c,03,00 hdr 80
    (II) PCI: 00:10:3: chip 1106,3104 card 1458,5004 rev 82 class 0c,03,20 hdr 00
    (II) PCI: 00:11:0: chip 1106,3177 card 1458,5001 rev 00 class 06,01,00 hdr 80
    (II) PCI: 00:11:1: chip 1106,0571 card 1458,5002 rev 06 class 01,01,8a hdr 00
    (II) PCI: 00:11:5: chip 1106,3059 card 1458,a002 rev 50 class 04,01,00 hdr 00
    (II) PCI: 00:13:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
    (II) PCI: 01:00:0: chip 10de,0322 card 0000,0000 rev a1 class 03,00,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -100x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) Bus 0 non-prefetchable memory range:
    [0] -100x00000000 - 0xffffffff (0x0) MX[B]
    (II) Bus 0 prefetchable memory range:
    [0] -100x00000000 - 0xffffffff (0x0) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
    (II) Bus 1 non-prefetchable memory range:
    [0] -100xe0000000 - 0xe1ffffff (0x2000000) MX[B]
    (II) Bus 1 prefetchable memory range:
    [0] -100xd8000000 - 0xdfffffff (0x8000000) MX[B]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(1:0:0) nVidia Corporation unknown chipset (0x0322) rev 161, Mem @ 0xe0000000/24, 0xd8000000/27
    (II) Addressable bus resource ranges are
    [0] -100x00000000 - 0xffffffff (0x0) MX[B]
    [1] -100x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
    [0] -100xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -100x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -100x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -100x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -100x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -100x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -100x00000000 - 0x000000ff (0x100) IX[B]
    (II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff
    (II) Active PCI resource ranges:
    [0] -100xe2001000 - 0xe20010ff (0x100) MX[B]
    [1] -100xe2000000 - 0xe20000ff (0x100) MX[B]
    [2] -100xd0000000 - 0xcfffffff (0x0) MX[B]O
    [3] -100xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    [4] -100xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
    [5] -100x0000ec00 - 0x0000ecff (0x100) IX[B]
    [6] -100x0000e800 - 0x0000e8ff (0x100) IX[B]
    [7] -100x0000e400 - 0x0000e40f (0x10) IX[B]
    [8] -100x0000e000 - 0x0000e01f (0x20) IX[B]
    [9] -100x0000dc00 - 0x0000dc1f (0x20) IX[B]
    [10] -100x0000d800 - 0x0000d81f (0x20) IX[B]
    [11] -100x0000d400 - 0x0000d407 (0x8) IX[B]
    [12] -100x0000d000 - 0x0000d01f (0x20) IX[B]
    (II) Active PCI resource ranges after removing overlaps:
    [0] -100xe2001000 - 0xe20010ff (0x100) MX[B]
    [1] -100xe2000000 - 0xe20000ff (0x100) MX[B]
    [2] -100xd0000000 - 0xcfffffff (0x0) MX[B]O
    [3] -100xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    [4] -100xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
    [5] -100x0000ec00 - 0x0000ecff (0x100) IX[B]
    [6] -100x0000e800 - 0x0000e8ff (0x100) IX[B]
    [7] -100x0000e400 - 0x0000e40f (0x10) IX[B]
    [8] -100x0000e000 - 0x0000e01f (0x20) IX[B]
    [9] -100x0000dc00 - 0x0000dc1f (0x20) IX[B]
    [10] -100x0000d800 - 0x0000d81f (0x20) IX[B]
    [11] -100x0000d400 - 0x0000d407 (0x8) IX[B]
    [12] -100x0000d000 - 0x0000d01f (0x20) IX[B]
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -100xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -100x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -100x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -100x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -100x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -100x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -100x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
    [0] -100xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -100x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -100x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -100x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -100x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -100xe2001000 - 0xe20010ff (0x100) MX[B]
    [6] -100xe2000000 - 0xe20000ff (0x100) MX[B]
    [7] -100xd0000000 - 0xcfffffff (0x0) MX[B]O
    [8] -100xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    [9] -100xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
    [10] -100x0000ffff - 0x0000ffff (0x1) IX[B]
    [11] -100x00000000 - 0x000000ff (0x100) IX[B]
    [12] -100x0000ec00 - 0x0000ecff (0x100) IX[B]
    [13] -100x0000e800 - 0x0000e8ff (0x100) IX[B]
    [14] -100x0000e400 - 0x0000e40f (0x10) IX[B]
    [15] -100x0000e000 - 0x0000e01f (0x20) IX[B]
    [16] -100x0000dc00 - 0x0000dc1f (0x20) IX[B]
    [17] -100x0000d800 - 0x0000d81f (0x20) IX[B]
    [18] -100x0000d400 - 0x0000d407 (0x8) IX[B]
    [19] -100x0000d000 - 0x0000d01f (0x20) IX[B]
    (II) LoadModule: "dbe"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
    (II) Module dbe: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
    (II) Module extmod: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension FontCache
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "type1"
    (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
    (II) Module type1: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.2
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Type1
    (II) Loading font CID
    (II) LoadModule: "speedo"
    (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
    (II) Module speedo: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.1
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Speedo
    (II) LoadModule: "glx"
    (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.4496
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.1
    (II) Loading extension GLX
    (II) LoadModule: "nvidia"
    (II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.4496
    Module class: XFree86 Video Driver
    (II) LoadModule: "mouse"
    (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
    (II) Module mouse: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    Module class: XFree86 XInput Driver
    ABI class: XFree86 XInput driver, version 0.4
    (II) NVIDIA XFree86 Driver 1.0-4496 Wed Jul 16 19:06:03 PDT 2003
    (II) NVIDIA Unified Driver for all NVIDIA GPUs
    (II) Primary Device is: PCI 01:00:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset NVIDIA GPU found
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -100xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -100x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -100x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -100x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -100x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -100xe2001000 - 0xe20010ff (0x100) MX[B]
    [6] -100xe2000000 - 0xe20000ff (0x100) MX[B]
    [7] -100xd0000000 - 0xcfffffff (0x0) MX[B]O
    [8] -100xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    [9] -100xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
    [10] -100x0000ffff - 0x0000ffff (0x1) IX[B]
    [11] -100x00000000 - 0x000000ff (0x100) IX[B]
    [12] -100x0000ec00 - 0x0000ecff (0x100) IX[B]
    [13] -100x0000e800 - 0x0000e8ff (0x100) IX[B]
    [14] -100x0000e400 - 0x0000e40f (0x10) IX[B]
    [15] -100x0000e000 - 0x0000e01f (0x20) IX[B]
    [16] -100x0000dc00 - 0x0000dc1f (0x20) IX[B]
    [17] -100x0000d800 - 0x0000d81f (0x20) IX[B]
    [18] -100x0000d400 - 0x0000d407 (0x8) IX[B]
    [19] -100x0000d000 - 0x0000d01f (0x20) IX[B]
    (II) resource ranges after probing:
    [0] -100xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -100x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -100x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -100x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -100x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -100xe2001000 - 0xe20010ff (0x100) MX[B]
    [6] -100xe2000000 - 0xe20000ff (0x100) MX[B]
    [7] -100xd0000000 - 0xcfffffff (0x0) MX[B]O
    [8] -100xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    [9] -100xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
    [10] 000x000a0000 - 0x000affff (0x10000) MS[B]
    [11] 000x000b0000 - 0x000b7fff (0x8000) MS[B]
    [12] 000x000b8000 - 0x000bffff (0x8000) MS[B]
    [13] -100x0000ffff - 0x0000ffff (0x1) IX[B]
    [14] -100x00000000 - 0x000000ff (0x100) IX[B]
    [15] -100x0000ec00 - 0x0000ecff (0x100) IX[B]
    [16] -100x0000e800 - 0x0000e8ff (0x100) IX[B]
    [17] -100x0000e400 - 0x0000e40f (0x10) IX[B]
    [18] -100x0000e000 - 0x0000e01f (0x20) IX[B]
    [19] -100x0000dc00 - 0x0000dc1f (0x20) IX[B]
    [20] -100x0000d800 - 0x0000d81f (0x20) IX[B]
    [21] -100x0000d400 - 0x0000d407 (0x8) IX[B]
    [22] -100x0000d000 - 0x0000d01f (0x20) IX[B]
    [23] 000x000003b0 - 0x000003bb (0xc) IS[B]
    [24] 000x000003c0 - 0x000003df (0x20) IS[B]
    (II) Setting vga for screen 0.
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/X11R6/lib/modules/libvgahw.a
    (II) Module vgahw: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.6
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (--) NVIDIA(0): Linear framebuffer at 0xD8000000
    (--) NVIDIA(0): MMIO registers at 0xE0000000
    (II) NVIDIA(0): NVIDIA GPU detected as: GeForce FX 5200
    (--) NVIDIA(0): VideoBIOS: 04.34.20.23.00
    (--) NVIDIA(0): VideoRAM: 131072 kBytes
    (II) NVIDIA(0): Connected display device(s): CRT-0
    (--) NVIDIA(0): Detected TV Encoder: NVIDIA
    (--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 8 bpp: 400 MHz
    (--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 400 MHz
    (--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 400 MHz
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Loading /usr/X11R6/lib/modules/libddc.a
    (II) Module ddc: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.6
    (WW) NVIDIA(0): Failure reading EDID parameters for display device CRT-0
    (II) NVIDIA(0): My Monitor: Using hsync range of 31.50-57.00 kHz
    (II) NVIDIA(0): My Monitor: Using vrefresh range of 50.00-100.00 Hz
    (II) NVIDIA(0): Clock range: 12.00 to 400.00 MHz
    (II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "512x384" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "512x384" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1152x864" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "576x432" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1600x1024" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "800x512" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
    (II) NVIDIA(0): Not using mode "1280x1024" (no mode of this name)
    (II) NVIDIA(0): Not using default mode "1152x768" (width too large for virtual size)
    (WW) NVIDIA(0): Not using mode "576x384":
    (WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8
    (WW) NVIDIA(0): Not using mode "360x200":
    (WW) NVIDIA(0): horizontal sync start (378) not a multiple of 8
    (**) NVIDIA(0): Validated modes for display device CRT-0:
    (**) NVIDIA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
    (**) NVIDIA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
    (**) NVIDIA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
    (**) NVIDIA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
    (**) NVIDIA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
    (**) NVIDIA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
    (**) NVIDIA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
    (**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
    (**) NVIDIA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
    (**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
    (**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
    (**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
    (**) NVIDIA(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
    (**) NVIDIA(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
    (**) NVIDIA(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
    (**) NVIDIA(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
    (**) NVIDIA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
    (**) NVIDIA(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
    (**) NVIDIA(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
    (**) NVIDIA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
    (**) NVIDIA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
    (**) NVIDIA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
    (**) NVIDIA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
    (**) NVIDIA(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
    (**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
    (**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
    (**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
    (**) NVIDIA(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
    (**) NVIDIA(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
    (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
    (==) NVIDIA(0): DPI set to (75, 75)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/X11R6/lib/modules/libfb.a
    (II) Module fb: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    ABI class: XFree86 ANSI C Emulation, version 0.2
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Loading /usr/X11R6/lib/modules/libramdac.a
    (II) Module ramdac: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.6
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 000xd8000000 - 0xdfffffff (0x8000000) MX[B]
    [1] 000xe0000000 - 0xe0ffffff (0x1000000) MX[B]
    [2] -100xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [3] -100x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [4] -100x000f0000 - 0x000fffff (0x10000) MX[B]
    [5] -100x000c0000 - 0x000effff (0x30000) MX[B]
    [6] -100x00000000 - 0x0009ffff (0xa0000) MX[B]
    [7] -100xe2001000 - 0xe20010ff (0x100) MX[B]
    [8] -100xe2000000 - 0xe20000ff (0x100) MX[B]
    [9] -100xd0000000 - 0xcfffffff (0x0) MX[B]O
    [10] -100xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    [11] -100xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
    [12] 000x000a0000 - 0x000affff (0x10000) MS[B](OprD)
    [13] 000x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
    [14] 000x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
    [15] -100x0000ffff - 0x0000ffff (0x1) IX[B]
    [16] -100x00000000 - 0x000000ff (0x100) IX[B]
    [17] -100x0000ec00 - 0x0000ecff (0x100) IX[B]
    [18] -100x0000e800 - 0x0000e8ff (0x100) IX[B]
    [19] -100x0000e400 - 0x0000e40f (0x10) IX[B]
    [20] -100x0000e000 - 0x0000e01f (0x20) IX[B]
    [21] -100x0000dc00 - 0x0000dc1f (0x20) IX[B]
    [22] -100x0000d800 - 0x0000d81f (0x20) IX[B]
    [23] -100x0000d400 - 0x0000d407 (0x8) IX[B]
    [24] -100x0000d000 - 0x0000d01f (0x20) IX[B]
    [25] 000x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    [26] 000x000003c0 - 0x000003df (0x20) IS[B](OprU)
    (II) NVIDIA(0): AGP 8X successfully initialized
    (II) NVIDIA(0): Setting mode "1024x768"
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (II) Loading extension NV-GLX
    (II) Loading extension NV-CONTROL
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension LBX
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) [GLX]: Initializing GLX extension
    (**) Option "Protocol" "IMPS/2"
    (**) Mouse1: Protocol: "IMPS/2"
    (**) Option "CorePointer"
    (**) Mouse1: Core Pointer
    (**) Option "Device" "/dev/input/mice"
    (EE) xf86OpenSerial: Cannot open device /dev/input/mice
    No such file or directory.
    (EE) xf86OpenSerial: Cannot open device /dev/input/mice
    No such file or directory.
    (EE) Mouse1: cannot open input device
    (EE) PreInit failed for input device "Mouse1"
    (II) UnloadModule: "mouse"
    (II) Keyboard "Keyboard1" handled by legacy driver
    (WW) No core pointer registered
    (II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
    No core pointer

    Fatal server error:
    failed to initialize core devices

    When reporting a problem related to a server crash, please send
    the full server output, not just the last messages.
    This can be found in the log file "/var/log/XFree86.0.log".
    Please report problems to xfree86@xfree86.org.


  4. #4

    Re:Gentoo XF86Config

    Looks like it is not seeing your mouse. What kind of mouse do you have? Is it USB or PS/2?

  5. #5

    Re:Gentoo XF86Config

    It is a m$ USB optical mouse

  6. #6

    Re:Gentoo XF86Config

    Does /dev/input/mice exists?

  7. #7

    Re:Gentoo XF86Config

    Yes it does. I have tried it. and it does not seem to work. if you look in the XF86Config file you will see it is already there.

  8. #8

    Re:Gentoo XF86Config

    I mean, does the device mice exists inside the folder /dev/input?

  9. #9

    Re:Gentoo XF86Config

    yup it does

  10. #10

    Re:Gentoo XF86Config

    Mmm...I have a similar setup as yours on Slackware at home. I will post my configuration file when I get home.

Similar Threads

  1. ATI Mobility M4 XF86Config ....
    By boblucci in forum Linux - Software, Applications & Programming
    Replies: 2
    Last Post: 04-15-2003, 10:35 AM
  2. XF86Config
    By mugs in forum Linux - Software, Applications & Programming
    Replies: 7
    Last Post: 12-20-2002, 08:51 PM
  3. XF86Config & Blackbox
    By teknik0s in forum Linux - Software, Applications & Programming
    Replies: 3
    Last Post: 12-17-2002, 02:54 AM
  4. how do you edit xf86config??
    By Mantis166 in forum Linux - Software, Applications & Programming
    Replies: 5
    Last Post: 12-04-2002, 05:27 PM
  5. xf86config
    By kornp in forum Linux - Software, Applications & Programming
    Replies: 2
    Last Post: 10-27-2002, 07:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •